AirTAC2P025 plastic direct-acting normally-closed solenoid valves with G1/8 or G1/4 ports,...
Official reference
Based on manufacturer documentation
Model support
For model confirmation
Parts lists
Code, photo, or BOM
Availability / lead time
By model and quantity
AirTAC2P025 plastic direct-acting normally-closed solenoid valves with G1/8 or G1/4 ports, Nylon66 body and VITON seals. Match voltage and lead-wire code; confirm actual fluid,temperature and installation before quotation.
Know your model? Send it with the quantity for a quote. Not sure? Start with a photo, label or description. We help identify the model and clarify availability and lead time. Mixed parts lists are welcome too.
AirTAC2P025 specifications official Chinese reference,printed216;2V pages excluded
Helpful for Model Matching:
| Exact ordering and ports | Two rows only:2P025-06 G1/8 and2P025-08 G1/4. Orifice2.5mm and Cv0.23 on both. Finished code requires2P025 +06/08 +A/B/C/E/F +I +G, giving10 combinations. I=lead-wire; G=G thread. Current 2P ordering does not list blank PT, NPT T, DIN/blank connection, other orifices, normally-open or piloted variants. |
| Medium, material and temperature | Source lists air, water and oil; body Nylon66, seal VITON; viscosity20cSt or less. This is catalogue scope, not blanket medium/chemical approval. Confirm fluid composition, contamination, actual viscosity and seal/body compatibility. Ambient and fluid temperature ranges are not specified for 2P. The 2V and generic VITON temperature ratings do not apply. |
| Own pressure and response | Operating0–0.7MPa; proof1.05MPa separately, not a working rating. Source also prints0–100psi and150psi respectively. Response0.05s or less is catalogue reference, not installed system timing guarantee. Zero-minimum-pressure direct action does not establish vacuum suitability, reverse-flow use or safety isolation. |
| Coil voltage and electrical limits | A AC220V; B DC24V; C AC110V; E AC24V; F DC12V. AC50/60Hz,±15%,7.0VA; DC±10%,7.0W. Class B insulation. Coil temperature rise AC35°C/DC45°C is rise, not permitted ambient/fluid temperature. Confirm actual supply,frequency,coil label and duty before quotation. |
| Own installation drawing | Both G port rows share the illustrated envelope: body length41mm,width25mm,overall height82mm,coil/lead-side envelope length42.5mm; port-axis height10mm. Mounting2×M4×0.7, shown depth5mm and center spacing16mm. Keep lead exit and tool clearance. Confirm drawing orientation, mating G port sealing and actual mounting; do not reuse2V02535.3/62.5mm envelopes. |
Ordering code matching
Code format
2P025[06/08][A/B/C/E/F]IGTwo ports × five voltage choices =10 current published combinations.2P02506AIG2P02508BIG2P02506CIG2P02508EIG2P02508FIG| 1Valve and port | 2Coil and wiring | 3Material and operating duty |
|---|---|---|
| Two rows only:2P025-06 G1/8 and2P025-08 G1/4. Orifice2.5mm and Cv0.23 on both. Finished code requires2P025 +06/08 +A/B/C/E/F +I +G, giving10 combinations. I=lead-wire; G=G thread. Current 2P ordering does not list blank PT, NPT T, DIN/blank connection, other orifices, normally-open or piloted variants. | A AC220V; B DC24V; C AC110V; E AC24V; F DC12V. AC50/60Hz,±15%,7.0VA; DC±10%,7.0W. Class B insulation. Coil temperature rise AC35°C/DC45°C is rise, not permitted ambient/fluid temperature. Confirm actual supply,frequency,coil label and duty before quotation. Feature text states IP65 coil and direct lead-wire connection; finished-code table lists only I lead-wire. Coil specification table additionally mentions terminal connection, but gives no separate finished terminal code. Preserve this source inconsistency; unlisted terminal versions require manual confirmation, not automatic DIN inference. Installed cable entry/protection must be checked; no unverified lead length or immersion/explosion-proof approval. | Source lists air, water and oil; body Nylon66, seal VITON; viscosity20cSt or less. This is catalogue scope, not blanket medium/chemical approval. Confirm fluid composition, contamination, actual viscosity and seal/body compatibility. Ambient and fluid temperature ranges are not specified for 2P. The 2V and generic VITON temperature ratings do not apply. Operating0–0.7MPa; proof1.05MPa separately, not a working rating. Source also prints0–100psi and150psi respectively. Response0.05s or less is catalogue reference, not installed system timing guarantee. Zero-minimum-pressure direct action does not establish vacuum suitability, reverse-flow use or safety isolation. |
If the label is incomplete, send the readable parts together with a photo.
2P02508AIG2P025Valve/orifice
Plastic NC direct-acting,2.5mm.
08Port
G1/4;06 G1/8.
ACoil supply
AC220V;B DC24/C AC110/E AC24/F DC12.
IGConnection/thread
I lead-wire,G thread;no automatic DIN/PT/NPT.
AirTAC2P025 plastic direct-acting normally-closed solenoid valves with G1/8 or G1/4 ports, Nylon66 body and VITON seals. Match voltage and lead-wire code; confirm actual fluid,temperature and installation before quotation.
2P025 is a plastic-body two-port/two-position direct-acting normally-closed solenoid valve. The official 2P file contains two preceding 2V pages; only physical page3, printed216, is 2P evidence. No brass 2V, 2W or 2J parameters or geometry are inherited. Two rows only:2P025-06 G1/8 and2P025-08 G1/4. Orifice2.5mm and Cv0.23 on both. Finished code requires2P025 +06/08 +A/B/C/E/F +I +G, giving10 combinations. I=lead-wire; G=G thread. Current 2P ordering does not list blank PT, NPT T, DIN/blank connection, other orifices, normally-open or piloted variants.
Source lists air, water and oil; body Nylon66, seal VITON; viscosity20cSt or less. This is catalogue scope, not blanket medium/chemical approval. Confirm fluid composition, contamination, actual viscosity and seal/body compatibility. Ambient and fluid temperature ranges are not specified for 2P. The 2V and generic VITON temperature ratings do not apply. A AC220V; B DC24V; C AC110V; E AC24V; F DC12V. AC50/60Hz,±15%,7.0VA; DC±10%,7.0W. Class B insulation. Coil temperature rise AC35°C/DC45°C is rise, not permitted ambient/fluid temperature. Confirm actual supply,frequency,coil label and duty before quotation.
2P
2P Add other models, quantities, photos, drawings, or a BOM. One request can cover several product groups.