Avoid a wrong match
- JCP single pin is not JCH twin-pin.
- No S magnet, arbitrary bore/stroke or NPT option.
- K PNP/KN NPN inductive, not a reed switch selector.
- Hole-position tolerance is not repeatability.
- No load/safety function inferred from model.
AirTAC sourcing reference•Pin and Locking Cylinders
SERIESJCP
AirTAC JCP Single Retractable Pin Assemblies
AirTAC JCP double-acting single retractable locating-pin assemblies, bore40/63 and...
Official reference
Based on manufacturer documentation
Model support
For model confirmation
Parts lists
Code, photo, or BOM
Availability / lead time
By model and quantity
Sourcing route & inquiry details
AirTAC JCP double-acting single retractable locating-pin assemblies, bore40/63 and stroke40/60. Match own A/B/C/D pin geometry, DIST inductive sensor option, PT/G and fixture mounting before quotation.
Know your model? Send it with the quantity for a quote. Not sure? Start with a photo, label or description. We help identify the model and clarify availability and lead time. Mixed parts lists are welcome too.
Request type
AirTAC originalModel matchingChina-source alternative
Match a JCP single retractable pin
Drawings & dimensions
Installation Drawings & Technical Specifications
Compare installed dimensions
AirTAC JCP specifications official Chinese reference
Helpful for Model Matching:
- JCP full code or label
- Bore40/63 and stroke40/60
- Own pin A/B/C/D and workpiece interface
- Blank/K PNP/KN NPN actual wiring
- PT/G and own bore-specific mounting
- Quantity and destination
- Single JCP pin own A–D drawing
- Correct bore40/63 mounting and ports
- DIST K/KN sensor bracket and wiring
- Hole tolerance not repeatability
Catalogue Technical Specifications
| Identity | JCP is a double-acting single retractable locating-pin assembly with two guide rods and adjustable limit screws, not a twin-pin JCH or a pin clamp like AQK. Bore40/63 mm and stroke40/60 mm are the complete published size matrix. |
| Conditions | Operating0.3–0.8 MPa; proof1.2 MPa separate. Filtered air40 μm or finer; −20 to70°C. No published load, repeatability or safety-function approval is inferred. |
| Pin types | Required pin A/B/C/D: each has its own top/side interface drawing and dimension/tolerance. A/B are different cross-hole/slot arrangements, C side profile, D plate pattern. Match own pin drawing, not just bore/stroke or a generic pin image. |
| Sensor | Blank no sensor; K inductive PNP, KN inductive NPN, DIST series. K/KN may be ordered separately. No magnetic S selector or reed switch inferred. Sensor cable, connector, supply and wiring details require exact selected-sensor confirmation. |
| Ports | Bore40 PT1/8;63 PT1/4. Blank PT, G suffix G thread. No NPT field. Two own air-port/mounting arrangements are shown in bore-specific drawings. |
| Mount and dimensional tolerance | Own bore40/63 drawings show four M8×1.25 mounting threads and Ø8 locating holes, with different body widths/envelopes. Published hole-position tolerance±0.02 and screw-hole position±0.1 refer to drawing dimensions marked with an asterisk. They are not positioning repeatability or complete assembly accuracy. |
| Envelope and weight | Total L240 mm at stroke40 and280 at stroke60 for both bores. Published weights:40 bore1.9/2.2 kg,63 bore2.9/3.4 kg at stroke40/60. Installed clearance, own pin type, sensor bracket and upper guide interface remain drawing confirmation. |
| RFQ inputs | Send full JCP code or readable label, pin A–D drawing and workpiece interface, bore/stroke, PT/G, K/KN wiring or sensorless need, mounting/clearance drawing, quantity and destination. Actual fixture fit, load and sensor supply confirmed on inquiry. |
Common Model Codes & Configurations:Useful for an RFQ
JCP40X60AKJCP63X40DKNGJCP40X40B
Technical reference & selection notes
Ordering Codes, Fit Verification & Specifications
Ordering code matching
Match each code segment
Code format
JCP[40/63]X[40/60][A/B/C/D][blank/K/KN][blank/G]Single pin, required pin geometry, inductive sensor optional.JCP40X60AKJCP63X40DKNGJCP40X40B| 1Size and function | 2Pin | 3Sensor and ports |
|---|---|---|
| JCP is a double-acting single retractable locating-pin assembly with two guide rods and adjustable limit screws, not a twin-pin JCH or a pin clamp like AQK. Bore40/63 mm and stroke40/60 mm are the complete published size matrix. | Required pin A/B/C/D: each has its own top/side interface drawing and dimension/tolerance. A/B are different cross-hole/slot arrangements, C side profile, D plate pattern. Match own pin drawing, not just bore/stroke or a generic pin image. | Blank no sensor; K inductive PNP, KN inductive NPN, DIST series. K/KN may be ordered separately. No magnetic S selector or reed switch inferred. Sensor cable, connector, supply and wiring details require exact selected-sensor confirmation. Bore40 PT1/8;63 PT1/4. Blank PT, G suffix G thread. No NPT field. Two own air-port/mounting arrangements are shown in bore-specific drawings. |
Read the model code
If the label is incomplete, send the readable parts together with a photo.
JCP40X60AK1Size and function
JCP is a double-acting single retractable locating-pin assembly with two guide rods and adjustable limit screws, not a twin-pin JCH or a pin clamp like AQK. Bore40/63 mm and stroke40/60 mm are the complete published size matrix.
2Pin
Required pin A/B/C/D: each has its own top/side interface drawing and dimension/tolerance. A/B are different cross-hole/slot arrangements, C side profile, D plate pattern. Match own pin drawing, not just bore/stroke or a generic pin image.
3Sensor and ports
Blank no sensor; K inductive PNP, KN inductive NPN, DIST series. K/KN may be ordered separately. No magnetic S selector or reed switch inferred. Sensor cable, connector, supply and wiring details require exact selected-sensor confirmation. Bore40 PT1/8;63 PT1/4. Blank PT, G suffix G thread. No NPT field. Two own air-port/mounting arrangements are shown in bore-specific drawings.
About JCP
AirTAC JCP double-acting single retractable locating-pin assemblies, bore40/63 and stroke40/60. Match own A/B/C/D pin geometry, DIST inductive sensor option, PT/G and fixture mounting before quotation.
Matching Questions
Does JCP share JCH twin-pin geometry or a repeatability rating?
No. JCP is the single retractable pin with its own pin A–D drawings, bore40/63 and stroke40/60. Published hole-position tolerances are drawing constraints, not repeatability. Send the exact pin and fixture drawing for confirmation.
JCP
Include this series in a project RFQ
JCP Add other models, quantities, photos, drawings, or a BOM. One request can cover several product groups.
Confirm inspection requirements before quotationSpecify shipping preferenceConfirm timing in the quotationOcean & Rail Available
COMPANION PRODUCTS
Products to use together
Build your pneumatic circuit with complementary components. Confirm dimensions and operating conditions before selecting a combination.
Control air direction
Product-group reference image
Directional control valves
Switch the pneumatic circuit. Select the valve function, flow capacity, port size and control signal for the application.
View companion product
Adjust actuator speed
Product-group reference image
PneuPart SL speed controllers
Control actuator air flow. Confirm thread, tube size, flow direction and required flow rate.
View companion product
Connect the air line
Product-group reference image
PneuPart tube fittings
Connect tubing to a valve or actuator. Match tube outside diameter, port thread and seal type.
View companion product
Route the air supply
Product-group reference image
PneuPart pneumatic tubing
Run air lines between fittings and components. Confirm outside diameter, bend radius, pressure and temperature.
View companion product
Planning a Complete Circuit or Multi-Item BOM?
Send your parts list, connection sizes and operating conditions for a matching check and combined quotation.