Find your HFKL type
Choose a type; send a model or photo if unsure.
Request a QuoteSend a Photo — We’ll Help Identify It →
Send the model, quantity and destination. For multiple items, attach a parts list or BOM.
AirTAC sourcing reference•Pneumatic Grippers
SERIESHFKL
AirTAC HFKL Guided Long-Stroke Parallel Grippers
Guided long-stroke parallel grippers with integrated roller guide and bore 10/16/20/25....
Official reference
Based on manufacturer documentation
Model support
For model confirmation
Parts lists
Code, photo, or BOM
Availability / lead time
By model and quantity
Sourcing route & inquiry details
Guided long-stroke parallel grippers with integrated roller guide and bore 10/16/20/25. Identify double or single action first, then confirm finger mounting, workpiece geometry and force at the actual pressure and gripping point before quotation.
Know your model? Send it with the quantity for a quote. Not sure? Start with a photo, label or description. We help identify the model and clarify availability and lead time. Mixed parts lists are welcome too.
Request type
AirTAC originalModel matchingChina-source alternative
Match a Guided Gripper and Function
Drawings & dimensions
Installation Drawings & Technical Specifications
Compare installed dimensions
AirTAC HFKL specifications official family reference
Helpful for Model Matching:
- Complete model and label; HFKL/HFSKL/HFTKL function
- External or internal gripping, L/H, workpiece weight and friction
- Finger mounting and custom jaw mass/length
- Pressure, cycle conditions, external moments and sensor code
- Quantity, destination and required air-loss behavior
- Use the function-specific symbol and force graph.
- Confirm finger type, total travel and single-action parenthesized dimensions.
- Check L/H, pressure and per-finger force separately from static guide moments.
- Body and jaw fitting bolt lengths/torques differ; keep sensor grooves clear.
Catalogue Technical Specifications
| Function / guide | HFKL double acting; HFSKL single acting normally closed; HFTKL single acting normally open. Integrated linear guide roller, long travel and positioning pin. Do not confuse with HFK shorter-stroke models. |
| Code / mounting | Bores 10/16/20/25; blank standard finger, B side mounting, N through-hole mounting, F bottom mounting. No stroke, S magnet, cushion or PT/G/T thread suffix is published. All include magnet; switches ordered separately. |
| Total travel | Opening/closing stroke, both sides: 8/12/18/22 mm for bores 10/16/20/25. This is total two-finger travel, not travel per finger and not an ordering-code field. |
| Pressure | Double acting: bore 10 0.2–0.7 MPa, others 0.15–0.7. Single acting: bore 10 0.35–0.7 MPa, others 0.25–0.7. Proof pressure is not specified and requires confirmation. |
| Air / temperature / repeatability | 40 μm filtered air; −20 to 70°C; lubrication not required; repeatability ±0.01 mm. Maximum frequency 120 c.p.m. is not jaw speed in mm/s. Use flow control if motion is too fast. |
| Ports / switches | 10 M3×0.5; 16/20/25 M5×0.8. Bore 10 CMSH/DMSH/EMSH; 16/20/25 CMSG/DMSG/EMSG and CMSH/DMSH/EMSH. Square/round switch slots have different matching sensor families; switches need separate confirmation. |
| Force per finger | At 0.5 MPa and gripping point L=20 mm: HFKL External 11/34/45/69 N, Internal 17/45/68/102 N; HFTKL External 7/27/35/55 N; HFSKL table Internal 13/38/59/87 N, External blank. Values are per finger, not sum of fingers, payload kg or a spring-only rating. |
| NC direction / spring boundary | HFSKL table labels force Internal and the normally-closed graph shows internal gripping, with the general title clamping force. This is an internal gripping rating; an external gripping rating is not specified. Confirm pressure-dependent operation. The installation text requires consultation if clamping only by spring force; do not promise fail-safe retention on air loss. |
| Static external loads | Vertical load Fv for 10/16/20/25: 87/147/221/382 N; pitch Mp and yaw My 0.26/0.68/1.32/1.94 N·m; roll Mr 0.53/1.36/2.65/3.88 N·m. Static limits are not dynamic gripping force or payload ratings. Allowable force under moment M depends on actual lever L in metres. |
| L / H / friction | Use function-specific force curves and closed/opened gripping-point range charts. Keep L and eccentric distance H within the curve; choose short/light jaw fittings. Source handling example uses safety factor 4 and friction-dependent force 10–20 times workpiece weight, not 10–20 times mass without gravity. Shock or acceleration needs a larger safety factor. |
| Mounting / workpiece | Use direction-specific body bolt engagement/torque and jaw fitting bolt table. Hold the gripping jaw with a spanner while tightening, not the body. Keep front through-hole screws clear of sensor grooves, provide contact gaps at stroke ends and during reverse motion, insert coaxially and avoid impact. |
| Source labels / material | 25 mm bottom finger drawing on page 269 is wrongly titled side mounting (B type), though ordering image and drawing geometry identify bottom F. Preserve full original drawing and verify actual geometry. Material drawing is based on a certain bore, not a universal BOM. |
Common Model Codes & Configurations:Useful for an RFQ
HFKL10HFKL16BHFKL25F
Technical reference & selection notes
Ordering Codes, Fit Verification & Specifications
Ordering code matching
Match each code segment
Code format
[HFKL/HFSKL/HFTKL]-[10/16/20/25]-[blank/B/N/F]Function, bore and finger mounting onlyHFKL20HFSKL16BHFTKL25F| 1Function | 2Bore | 3Finger type |
|---|---|---|
| HFKL double; HFSKL single NC; HFTKL single NO | 10/16/20/25, with fixed total travel 8/12/18/22 mm | Blank standard; B side; N through-hole; F bottom |
Avoid a wrong match
- No stroke or S/G/T suffix is published; all variants already include magnet.
- Total stroke is both sides together; force is per finger at 0.5 MPa and L=20 mm.
- HFSKL publishes Internal force with an internal-gripping diagram; no External force value is published.
- Single-action spring-only clamping is consultation-only; no unconditional air-loss retention claim.
- Static Fv and moment limits are not dynamic gripping force or workpiece payload.
- B/N/F are finger mounting configurations; exact drawing and jaw geometry still need checking.
Read the model code
If the label is incomplete, send the readable parts together with a photo.
HFKL 20 NHFKLFunction
Double acting guided parallel gripper
20Bore
Bore 20 mm; total travel 18 mm, not a stroke code
NFinger mounting
Through-hole finger mounting; match the complete drawing
About HFKL
Guided long-stroke parallel grippers with integrated roller guide and bore 10/16/20/25. Identify double or single action first, then confirm finger mounting, workpiece geometry and force at the actual pressure and gripping point before quotation.
Matching Questions
Does the code contain stroke or S magnet?
No. The ordering table uses only family, bore and optional finger type. All include magnet; switches are ordered separately. Stroke is the total travel of both sides.
Is a matched model enough to approve grip retention?
Confirm force per finger at actual pressure and L/H, friction and external loads. HFSKL publishes internal-gripping force only; spring-only clamping requires consultation.
HFKL
Include this series in a project RFQ
HFKL Add other models, quantities, photos, drawings, or a BOM. One request can cover several product groups.
Confirm inspection requirements before quotationSpecify shipping preferenceConfirm timing in the quotationOcean & Rail Available
COMPANION PRODUCTS
Products to use together
Build your pneumatic circuit with complementary components. Confirm dimensions and operating conditions before selecting a combination.
Control air direction
Product-group reference image
Directional control valves
Switch the pneumatic circuit. Select the valve function, flow capacity, port size and control signal for the application.
View companion product
Adjust actuator speed
Product-group reference image
PneuPart SL speed controllers
Control actuator air flow. Confirm thread, tube size, flow direction and required flow rate.
View companion product
Connect the air line
Product-group reference image
PneuPart tube fittings
Connect tubing to a valve or actuator. Match tube outside diameter, port thread and seal type.
View companion product
Route the air supply
Product-group reference image
PneuPart pneumatic tubing
Run air lines between fittings and components. Confirm outside diameter, bend radius, pressure and temperature.
View companion product
Planning a Complete Circuit or Multi-Item BOM?
Send your parts list, connection sizes and operating conditions for a matching check and combined quotation.