3/2 solenoid valves with M5 or 1/8 ports. Choose 3V110 single solenoid NC/NO or 3V120 double...
Official reference
Based on manufacturer documentation
Model support
For model confirmation
Parts lists
Code, photo, or BOM
Availability / lead time
By model and quantity
3/2 solenoid valves with M5 or 1/8 ports. Choose 3V110 single solenoid NC/NO or 3V120 double solenoid, then match voltage, entry and thread. Send the full model, quantity and destination for a quote.
Know your model? Send it with the quantity for a quote. Not sure? Start with a photo, label or description. We help identify the model and clarify availability and lead time. Mixed parts lists are welcome too.
Choose a type; send a model or photo if unsure.
3V110
Single solenoid · NC or NO
3V120
Double solenoid · memory function
Send the model, quantity and destination. For multiple items, attach a parts list or BOM.
Match a 3V100 model code
Choose 3V100M / 200M / 300M by valve size. Confirm valve model, stations, thread and assembly scope.
View base details and request a quote →3V100 control, state, voltage, entry and thread ordering diagram
Helpful for Model Matching:
| Function / pilot | 3/2 solenoid valve; internal or external pilot. Pilot selection is not encoded in this ordering diagram; confirm installed arrangement separately. |
| Port / body | M5 or 1/8; aluminum alloy |
| Published flow | 3V110-06 / 3V120-06: 10.2 mm², Cv0.6. No M5 value published. |
| Operating / proof pressure | 0.15–0.8 MPa (21–114 psi); proof 1.2 MPa (175 psi) |
| Medium / temperature | Air filtered through 40 μm element; −20 to +70 °C |
| Voltage tolerance | AC ±15%; DC ±10% |
| Coil power | AC220V 3.5VA; AC110V 3.5VA; AC24V 4.0VA; DC24V 2.8W; DC12V 2.5W |
| Protection / insulation | IP65 (DIN40050); B Class |
| Entry / lead | Terminal (blank) or grommet (I); grommet wire length 0.5 m |
| Actuation / frequency | Actuating time 0.05 s and below; maximum no-load 5 cycles/s |
| Lubrication | Not required; once lubricated continue the same medium. ISO VG32 or equivalent recommended. |
Ordering code matching
Code format
3V1[10/20]-[M5/06]-[NC/NO for10]-[A/B/C/E/F]-[blank/I]-[blank/G/T for06]Keep voltage → entry → thread order3V110-M5-NC-B3V110-06-NO-A-I-G3V120-06-B-T| ①Control / state | ②Port | ③Voltage | ④Entry / thread |
|---|---|---|---|
| 10 single solenoid requires NC/NO; 20 double solenoid without NC/NO. | M5 or 06=1/8. M5 has no thread code. | A=AC220V; B=DC24V; C=AC110V; E=AC24V; F=DC12V. | After voltage: blank terminal or I grommet; then blank PT, G or T=NPT for 06. |
If the label is incomplete, send the readable parts together with a photo.
3V110-06-NC-B-I-GControl / stateControl / state
10 single solenoid requires NC/NO; 20 double solenoid without NC/NO.
PortPort
M5 or 06=1/8. M5 has no thread code.
VoltageVoltage
A=AC220V; B=DC24V; C=AC110V; E=AC24V; F=DC12V.
Entry / threadEntry / thread
After voltage: blank terminal or I grommet; then blank PT, G or T=NPT for 06.
3V100 is a three-port two-position solenoid-valve family. 3V110 is single solenoid, with NC normally closed or NO normally open. 3V120 is double solenoid with memory function and no NC/NO ordering suffix. Match full voltage, electrical entry, thread and installed pilot arrangement.
No. The catalogue gives NC/NO for single-solenoid 3V110 only. Double-solenoid 3V120 has memory function and uses no state suffix.
B is DC24V, E is AC24V. Keep the voltage code, optional I electrical entry and final thread suffix in the published order; send the coil label if unclear.
No. Internal and external pilot are listed but this diagram publishes no pilot-selection code. The separate manifold catalogue lists 3V100M for 3V100, 1F–16F, with base inlet 1/4. Send installed pilot details, station count, thread, blank plates, quantity and destination.
3V100
3V100 Add other models, quantities, photos, drawings, or a BOM. One request can cover several product groups.
Build your pneumatic circuit with complementary components. Confirm dimensions and operating conditions before selecting a combination.
Product-group reference image
Connect tubing to a valve or actuator. Match tube outside diameter, port thread and seal type.
Product-group reference image
Run air lines between fittings and components. Confirm outside diameter, bend radius, pressure and temperature.
Product-group reference image
Filter and regulate supply air. Confirm filtration, pressure range and flow requirements for the connected equipment.
Send your parts list, connection sizes and operating conditions for a matching check and combined quotation.