Direct-acting3/2 solenoid valves,3V206(1/8) and3V208(1/4),each with NC/NO options. Send full...
Official reference
Based on manufacturer documentation
Model support
For model confirmation
Parts lists
Code, photo, or BOM
Availability / lead time
By model and quantity
Direct-acting3/2 solenoid valves,3V206(1/8) and3V208(1/4),each with NC/NO options. Send full model,voltage,quantity and destination for a quotation.
Know your model? Send it with the quantity for a quote. Not sure? Start with a photo, label or description. We help identify the model and clarify availability and lead time. Mixed parts lists are welcome too.
Choose a type; send a model or photo if unsure.
3V206
1/8 main ports ·NC/NO
3V208
1/4 main ports ·NC/NO
Send the model, quantity and destination. For multiple items, attach a parts list or BOM.
Match a3V2 model code
3V2 valve ordering code
Helpful for Model Matching:
| Function | Direct acting;3 port2 position;NC orNO for both06/08. |
| Main ports / thread | 3V206:1/8;3V208:1/4;three main ports same size. Blank PT,G G,T NPT. |
| Published flow area / Cv | 3V206:3.2mm²/Cv0.18;3V208:3.4mm²/Cv0.19. |
| Common operating pressure | 0–0.8MPa(0–114psi). |
| Vacuum condition caveat | Official vacuum row prints−102.2kPa to0.1MPa with−1.45 to14.2psi;lower-limit unit values conflict. Specific vacuum capability requires confirmation;do not treat the printed lower bound as a guaranteed rating. |
| Proof pressure | 1.2MPa(175psi). |
| Temperature / body | −20 to+70°C;aluminum alloy. |
| Medium / lubrication | Air filtered by40μm element;lubrication not required. |
| Voltage / power | AC220/AC110/AC24V andDC24/DC12V. AC7VA;DC7.0W. AC tolerance±15%;DC±10%. |
| Coil / entry | IP65(DIN40050);B-class insulation;terminal or grommet;grommet lead0.5m. |
| Response / frequency | Actuating time0.05s or below;max10cycles/s(no load). |
Ordering code matching
Code format
3V2[06/08]-[NC/NO]-[A/B/C/E/F]-[blank/I]-[blank/G/T]Direct-acting valve3V206-NC-A3V208-NO-B-I-G3V208-NC-F-T| ①Circuit and port | ②Voltage | ③Entry then thread |
|---|---|---|
| 3V206:1/8;3V208:1/4. Both NC normally closed orNO normally open;no10/20 field. | A AC220V;B DC24V;C AC110V;E AC24V;F DC12V. | Blank terminal;I grommet0.5m lead. Threadlast:blank PT,G G,T NPT. No pilot suffix shown. |
If the label is incomplete, send the readable parts together with a photo.
3V208-NO-B-I-G3V2+06/08Family / main port
06=1/8;08=1/4;direct acting.
NC/NOActing type
NC normally closed;NO normally open. Both ports offer either.
A/B/C/E/FVoltage
A AC220V;B DC24V;C AC110V;E AC24V;F DC12V.
blank/I thenblank/G/TEntry / thread
Blank terminal;I grommet0.5m. Thenblank PT,G G,T NPT.
3V2 is direct acting,not the internally/externally piloted3V200 family. Both06 and08 ports offer NC normally closed and NO normally open. Keep acting type,voltage,electrical entry and thread in that order. Check installed clearance and optionalFA bracket.
No. 3V2 is direct acting with3V206/208 and NC/NO options;3V200 is a different piloted family. Confirm full label and installation drawing;manifold compatibility requires separate confirmation.
The catalogue allows vacuum use,but its lower-limit figures−102.2kPa and−1.45psi do not agree. Send the required vacuum level,fluid and switching conditions for confirmation instead of relying on that printed lower bound.
It is the optionalFA mounting bracket shown in the accessory ordering diagram and installation drawing. It is not a manifold base. State whether a bracket is required with the valve quotation.
3V2
3V2 Add other models, quantities, photos, drawings, or a BOM. One request can cover several product groups.
Build your pneumatic circuit with complementary components. Confirm dimensions and operating conditions before selecting a combination.
Product-group reference image
Connect tubing to a valve or actuator. Match tube outside diameter, port thread and seal type.
Product-group reference image
Run air lines between fittings and components. Confirm outside diameter, bend radius, pressure and temperature.
Product-group reference image
Filter and regulate supply air. Confirm filtration, pressure range and flow requirements for the connected equipment.
Send your parts list, connection sizes and operating conditions for a matching check and combined quotation.