Direct-acting3/2 valves with NC or NO and a required dedicated manifold. Match voltage,...
Official reference
Based on manufacturer documentation
Model support
For model confirmation
Parts lists
Code, photo, or BOM
Availability / lead time
By model and quantity
Direct-acting3/2 valves with NC or NO and a required dedicated manifold. Match voltage, electrical entry,1F–20F stations and centralized or separated exhaust. Send the required scope, model, quantity and destination for a quote.
Know your model? Send it with the quantity for a quote. Not sure? Start with a photo, label or description. We help identify the model and clarify availability and lead time. Mixed parts lists are welcome too.
Choose a type; send a model or photo if unsure.
3V2M NC
Normally closed · dedicated base required
3V2M NO
Normally open · dedicated base required
Send the model, quantity and destination. For multiple items, attach a parts list or BOM.
Match a 3V2M model code
Specify the valve, sub-base or assembled group. Confirm stations, centralized or separated exhaust, thread and supply scope.
View base details and request a quote →3V2M valve, manifold, group and blank-plate ordering diagrams
Helpful for Model Matching:
| Function / actuation | Direct acting3/2; NC or NO; dedicated sub-base required |
| Port / flow | Manifold ports1/8; effective area1.7 mm², Cv0.1 |
| Working / proof pressure | 0–0.8 MPa (0–114 psi); proof1.2 MPa (175 psi) |
| Exhaust | Centralized (blank) or separated (D) manifold exhaust |
| Medium / temperature / body | Air filtered through40 μm element; −20 to+70 °C; aluminum alloy |
| Voltage tolerance | AC ±15%; DC ±10% |
| Coil power | AC7VA; DC7.0W |
| Protection / insulation | IP65 (DIN40050); B Class |
| Entry / lead | Terminal (blank) or grommet (I); wire length0.5 m |
| Actuation / frequency | 0.05 s and below; maximum no-load10 cycles/s |
| Lubrication | Not required |
| Dedicated assembly / kits | 1F–20F. Manifold kit contains manifold, seal and screws. Blank-plate kit P-3V2M-R2 contains plate and screws. Group and valve-alone codes are different supply scopes. |
Ordering code matching
Code format
3V2M-[NC/NO]-[A/B/C/E/F]-[blank/I]Valve only; dedicated base still required3V2M-[NC/NO]-[A/B/C/E/F]-[blank/I]-[1F–20F]-[blank/D]-[blank/G/T]Valve-and-manifold group3V2M-[1F–20F]-[blank/D]-[blank/G/T]Manifold aloneP-3V2M-R2Blank-plate kit3V2M-NC-B3V2M-NO-A-I3V2M-NC-B-I-3F-D-G3V2M-5F-D-TP-3V2M-R2| ①Function / voltage | ②Electrical entry | ③Stations / exhaust | ④Manifold thread |
|---|---|---|---|
| NC normally closed; NO normally open. A=AC220V; B=DC24V; C=AC110V; E=AC24V; F=DC12V. | Blank terminal; I grommet. Valve-alone code ends here, with no port or thread field. | Manifold or group 1F–20F; blank centralized exhaust, D separated exhaust. | Final blank PT, G or T=NPT; port size fixed1/8. |
If the label is incomplete, send the readable parts together with a photo.
3V2M-NC-B-I-3F-D-GFunction / voltageFunction / voltage
NC normally closed; NO normally open. A=AC220V; B=DC24V; C=AC110V; E=AC24V; F=DC12V.
Electrical entryElectrical entry
Blank terminal; I grommet. Valve-alone code ends here, with no port or thread field.
Stations / exhaustStations / exhaust
Manifold or group 1F–20F; blank centralized exhaust, D separated exhaust.
Manifold threadManifold thread
Final blank PT, G or T=NPT; port size fixed1/8.
3V2M is a direct-acting 3/2 valve with NC or NO function and a required dedicated sub-base. Request a valve, 1F–20F manifold, valve-and-manifold group or blank-plate kit; specify voltage, electrical entry and centralized or separated exhaust where applicable.
No. The catalogue explicitly says NC/NO function cannot be converted by flipping the special sub-base seal. Send the required function and existing valve/base details.
No. Valve, manifold and valve-group ordering diagrams are separate. A valve requires the dedicated sub-base. Request the correct scope, stations1F–20F, exhaust mode, thread and blank plates.
D specifies separated exhaust; blank specifies centralized exhaust. It follows station count and precedes thread. Compare the corresponding installation drawing and available mounting space.
3V2M
3V2M Add other models, quantities, photos, drawings, or a BOM. One request can cover several product groups.
Build your pneumatic circuit with complementary components. Confirm dimensions and operating conditions before selecting a combination.
Product-group reference image
Connect tubing to a valve or actuator. Match tube outside diameter, port thread and seal type.
Product-group reference image
Run air lines between fittings and components. Confirm outside diameter, bend radius, pressure and temperature.
Product-group reference image
Filter and regulate supply air. Confirm filtration, pressure range and flow requirements for the connected equipment.
Send your parts list, connection sizes and operating conditions for a matching check and combined quotation.