AirTAC 4V100 five-port solenoid valves for 5/2 and 5/3 circuits. Match valve function/center,...
Official reference
Based on manufacturer documentation
Model support
For model confirmation
Parts lists
Code, photo, or BOM
Availability / lead time
By model and quantity
AirTAC 4V100 five-port solenoid valves for 5/2 and 5/3 circuits. Match valve function/center, port and thread, coil voltage and electrical entry. Send the model code, valve/coil labels or circuit with quantity and destination for quotation and fit confirmation.
Know your model? Send it with the quantity for a quote. Not sure? Start with a photo, label or description. We help identify the model and clarify availability and lead time. Mixed parts lists are welcome too.
Match a 4V100 / 200 solenoid valve
Choose the base by valve size. Confirm stations, thread, blank plates and supply scope; the 4V reference drawing does not establish complete 5V assembly dimensions.
View base details and request a quote →AirTAC 4V100 official English function symbols
Helpful for Model Matching:
| Valve function and center | 10: single-solenoid 5/2; 20: double-solenoid 5/2 with memory; 30C: double-solenoid 5/3 closed center; 30E: exhaust center; 30P: pressure center. Match the circuit and desired center behavior. A memory or center choice is not a certified safety stop or load-holding guarantee. |
| Pilot and pressure | Internal or external pilot is stated in the specification. The published ordering table does not encode a pilot selector: confirm actual pilot arrangement, available pressure and circuit separately. Operating pressure 0.15–0.8 MPa; proof pressure 1.2 MPa is not an operating rating. |
| Air and temperature | Air filtered to 40 μm or finer; −20 to 70°C; aluminum alloy body. Lubrication not required. If lubrication is used, continue with the same medium; ISO VG32 or equivalent is recommended. |
| Voltage and electrical entry | A: AC220V; B: DC24V; C: AC110V; E: AC24V; F: DC12V. AC tolerance ±15%; DC ±10%. Blank: terminal; I: grommet with 0.5 m lead. Confirm AC/DC, voltage, coil power, connector orientation and terminal/grommet clearances. |
| Coil and timing conditions | Insulation class B and IP65 (DIN40050) are published coil specifications; verify the complete installed connector/sealing arrangement. Activation time 0.05 s or below is not a complete machine-cycle guarantee. Maximum frequency 5 cycles/s for 10/20, 3 cycles/s for 30C/E/P, under no-load conditions. |
| Thread and code boundary | For inch ports, blank means PT, G means G thread, T means NPT. Center codes 30C/30E must not be confused with voltage codes C/E. Standard valve lookup does not establish explosion-proof, alternate-pilot, coil-only or manifold accessory compatibility. |
| Manifold and RFQ inputs | A manifold/base is a separate accessory, not a valve function. Confirm base model, station count, valve size, thread, blank plates and assembly from labels/drawings. Send valve and coil codes or photos, circuit, pressure/flow need, voltage/entry, ports, mounting envelope, quantity and destination for quotation. |
| 4V100 ports | M5: fixed M5 inlet/outlet with no PT/G/T thread suffix in the ordering table; 06: 1/8 inlet/outlet with PT/G/NPT selection. Exhaust connection and mounting must be checked against the actual 4V110/120/130 drawing; do not assume every port is 1/8. |
| 4V100 coil power and weight | AC220/110: 3.5VA; AC24: 4.0VA; DC24: 2.8W; DC12: 2.5W. Valve weights: 120g single 5/2, 175g double 5/2, 200g three-position. |
| 4V100 published flow scope | 4V110-06 and 4V120-06: equivalent area 10.2 mm², Cv 0.6; 4V130C-06: 8.6 mm², Cv 0.51. This row does not individually rate M5 or 30E/30P; confirm those instead of copying the 06 closed-center values. Flow chart specifically illustrates 4V110-06 under AirTAC laboratory conditions. |
| 4V100 mounting and base reference | Use the separate terminal/grommet drawings for 4V110, 4V120 and 4V130. M5 and 06 have different A/B/C/D/E/F/G cells; do not use one universal envelope. Ordering note refers to manifold printed page 88, which is not present in this two-page valve PDF. The separate official 4V/5V manifold sheet must be consulted. |
Ordering code matching
Code format
4V1[10/20/30C/30E/30P]-[M5/06][A/B/C/E/F][I][G/T]I and thread suffix optional; M5 has no thread suffix. Pilot/base separately confirmed.4V110-M5B4V110-06B4V120-06AIT4V130C-06FG4V130E-06EI4V130P-M5C| 1Family | 2Function | 3Port | 4Voltage | 5Electrical entry | 6Thread |
|---|---|---|---|---|---|
| 4V100; confirm the correct size family. | 10 single 5/2; 20 double 5/2; 30C closed, 30E exhaust, 30P pressure center 5/3. | M5 fixed metric (no thread suffix); 06 inlet/outlet 1/8. | A AC220V; B DC24V; C AC110V; E AC24V; F DC12V. | Blank terminal; I grommet, 0.5 m lead. | M5 has no thread code; inch-port blank PT / G G-thread / T NPT. |
If the label is incomplete, send the readable parts together with a photo.
4V110-M5B1Family
4V100; confirm the correct size family.
2Function
10 single 5/2; 20 double 5/2; 30C closed, 30E exhaust, 30P pressure center 5/3.
3Port
M5 fixed metric (no thread suffix); 06 inlet/outlet 1/8.
4Voltage
A AC220V; B DC24V; C AC110V; E AC24V; F DC12V.
5Electrical entry
Blank terminal; I grommet, 0.5 m lead.
6Thread
M5 has no thread code; inch-port blank PT / G G-thread / T NPT.
AirTAC 4V100 five-port solenoid valves for 5/2 and 5/3 circuits. Match valve function/center, port and thread, coil voltage and electrical entry. Send the model code, valve/coil labels or circuit with quantity and destination for quotation and fit confirmation.
Compact 5-port 2-position and 5-port 3-position pilot solenoid valves with M5 and G1/8 thread connections. Optimized for 100M manifold rail grouping on compact packaging pickers, laboratory automation, and high-frequency sorting ejectors.
Engineering Notice: Referenced manufacturer series and part numbers are provided for interchange identification and replacement compatibility purposes.
Upload Nameplate / BOMSend complete valve and coil codes or photos, pneumatic circuit and required center behavior, pilot/supply pressure, voltage and electrical entry, port/thread, manifold/mounting dimensions, quantity and destination. 10/20/30C/30E/30P are configuration choices inside this size family; a separate base and its stations must be confirmed independently.
4V-100
4V-100 Add other models, quantities, photos, drawings, or a BOM. One request can cover several product groups.
Build your pneumatic circuit with complementary components. Confirm dimensions and operating conditions before selecting a combination.
Product-group reference image
Connect tubing to a valve or actuator. Match tube outside diameter, port thread and seal type.
Product-group reference image
Run air lines between fittings and components. Confirm outside diameter, bend radius, pressure and temperature.
Product-group reference image
Filter and regulate supply air. Confirm filtration, pressure range and flow requirements for the connected equipment.
Send your parts list, connection sizes and operating conditions for a matching check and combined quotation.