AirTAC 6DM / 6D / 6DW integrated valve manifolds with 15-, 25- or 37-pin D-sub input. Match...
Official reference
Based on manufacturer documentation
Model support
For model confirmation
Parts lists
Code, photo, or BOM
Availability / lead time
By model and quantity
AirTAC 6DM / 6D / 6DW integrated valve manifolds with 15-, 25- or 37-pin D-sub input. Match station count, tube diameter, voltage, valve mix and signal capacity. Send the assembly code or label, station layout, quantity and destination for quotation.
Know your model? Send it with the quantity for a quote. Not sure? Start with a photo, label or description. We help identify the model and clarify availability and lead time. Mixed parts lists are welcome too.
Choose a type; send a model or photo if unsure.
6DM
15-pin; 3–12 stations; no published communication field
6D
25-pin; 3–21 stations; optional 24-output module
6DW
37-pin; 13–33 stations; optional 36-output module
Send the model, quantity and destination. For multiple items, attach a parts list or BOM.
Match a 6DM / 6D / 6DW manifold or valve
Confirm 15/25/37-pin format, station count, tube ports and valve layout separately.
View base details and request a quote →15-pin for 6DM; 25-pin for CPV10S, CPV15S and 6D; 37-pin for 6DW. Confirm connector ends, length and actual signal/common wiring separately.
View cable details and request a quote →AirTAC specification zh source reference
Helpful for Model Matching:
| Product and supply scope | Side-port integrated valve manifolds: 6DM 15-pin, 6D 25-pin, 6DW 37-pin D-sub. Individual 6D valves and without-valves bases are different supply scopes; a matched code does not imply a fully equipped bank. |
| Station and signal capacity | 6DM 3–12 stations: maximum double/three-position valves 5 at 3–9 stations, 4 at 10, 3 at 11, 2 at 12. 6D 3–21: maxima 12/9/6/3 for 3–12/13–15/16–18/19–21 stations. 6DW 13–33: maxima 18/15/12/9/6/3 for 13–18/19–21/22–24/25–27/28–30/31–33 stations. Double valves occupy the first eligible stations from D-sub side. |
| Size-dependent ports | 05H = 0500 size, A/B J04 Ø4 or J06 Ø6 mm; 1H = 100, J04/J06/J08 Ø4/6/8 mm; 2H = 200, J08/J10 Ø8/10 mm. P and R push-in tubes Ø8/10/12 mm for 0500/100/200; no thread suffix inferred. |
| Circuit and pressure | Pilot operated; 5/3 closed/exhaust/pressure-centre standard valves 0.2–0.8 MPa; other standard forms 0.15–0.8 MPa. Proof pressure 1.2 MPa is not operating pressure. Filtered air 40 μm or finer. External-pilot pressure and special-air assembly conditions require confirmation. |
| Voltage and coil | B DC24V or F DC12V, DC ±10%, DC 0.7 W, F insulation, dustproof. No IP65 or AC option is published. Standard response ≤0.05 s; no full-bank cycle frequency promise. |
| Temperature version difference | English catalogue specifies −10 to 50°C for 6D/6DW; current Chinese catalogue specifies −20 to 70°C for 6DM/6D/6DW. Confirm actual supplied version and environment rather than silently combining ranges. Communication module separately −10 to 60°C. |
| Ordering and physical layout | S single 5/2; D double 5/2; C/E/P double 5/3 closed/exhaust/pressure centre. Counts total ≤stations; missing stations require provisional blocks. Installation starts from D-sub: C→E→P, then D, then S. Quantity validity does not confirm a custom physical station map. |
| Communication | 6DM has no communication field in the published table. 6D: CPN1/2 PROFINET PNP/NPN, CEN1/2 EtherNet/IP, CEA1/2 EtherCAT, CLK1 IO-Link PNP. 6DW uses CPN11/22, CEN11/22, CEA11/22, CLK11 for 36 outputs instead of 24. IO-Link has no NPN type; module control power is DC24V ±10%, separately from DC12V valve option. |
| Pinout and mounting | COM pin 8/13/19 for 6DM/6D/6DW. Signal assignment changes with station range; CPV10S/CPV15S pinouts do not apply. COM conductor ≥22 AWG per source; English 6DW page56 incorrectly mentions COM13 whereas pin table/page57 says19, so use exact connector drawing and confirm. DIN rail with stop screw or four-bolt panel mounting. |
| Derivative scope | 6D/6DW derivatives: E individual inlet, R individual exhaust, W external pilot; assembly counts SE/DE/CE/EE/PE, SR/DR/CR/ER/PR, SW/DW/CW/EW/PW (maximum two types per special mode). DNC/DNO dual 3/2 NC-NC/NO-NO at double-5/2 positions. These are family configurations, not extra indexed peers. Exact routing and special ratings require confirmation. |
Ordering code matching
Code format
6DM/6D/6DW [05/1/2]H [stations]F-[port] [B/F] [S/D/C/E/P counts] [module] [special counts]Assembly with valves; format-specific ranges and signal limits6D [05/1/2] [10/20/30C/30E/30P/20NC/20NO] [B/F]Individual valve; special E/R/W separately confirmed6DM1H 8F-J06 B S4 D1 C1 E1 P16D1H 8F-J06 B S1 D2 C2 E2 P16DW1H 18F-J06 B S5 D8 C2 E1 P26D120B6D120NCB6D1H 6F-J06 B S2 D1 C1 CPN1-SE1 DE1| 1Format / size | 2Stations / ports | 3Voltage / quantity | 4Communication / special |
|---|---|---|---|
| 6DM / 6D / 6DW + 05H / 1H / 2H | 15pin 3–12F; 25pin 3–21F; 37pin 13–33F. Size-specific J04/J06/J08/J10. | B DC24V; F DC12V. S/D/C/E/P with counts; total ≤stations and double capacity. | Only published module suffix and special-air counts. Send station layout. |
If the label is incomplete, send the readable parts together with a photo.
6DM1H 8F-J06 B S4 D1 C1 E1 P11Format / size
6DM / 6D / 6DW + 05H / 1H / 2H
2Stations / ports
15pin 3–12F; 25pin 3–21F; 37pin 13–33F. Size-specific J04/J06/J08/J10.
3Voltage / quantity
B DC24V; F DC12V. S/D/C/E/P with counts; total ≤stations and double capacity.
4Communication / special
Only published module suffix and special-air counts. Send station layout.
AirTAC 6DM / 6D / 6DW integrated valve manifolds with 15-, 25- or 37-pin D-sub input. Match station count, tube diameter, voltage, valve mix and signal capacity. Send the assembly code or label, station layout, quantity and destination for quotation.
It identifies the published configuration, not installed fit or supply completeness. Confirm connector pinout, actual station layout, air routing, temperature version and whether valves, provisional blocks, cables or communication module are included. Send labels and drawing with quantity and destination.
6DM / 6D / 6DW
6DM / 6D / 6DW Add other models, quantities, photos, drawings, or a BOM. One request can cover several product groups.
Build your pneumatic circuit with complementary components. Confirm dimensions and operating conditions before selecting a combination.
Product-group reference image
Connect tubing to a valve or actuator. Match tube outside diameter, port thread and seal type.
Product-group reference image
Run air lines between fittings and components. Confirm outside diameter, bend radius, pressure and temperature.
Product-group reference image
Filter and regulate supply air. Confirm filtration, pressure range and flow requirements for the connected equipment.
Send your parts list, connection sizes and operating conditions for a matching check and combined quotation.