AirTAC 6STV pilot-operated three-port, two-position solenoid valves in 0500/100/200/300...
Official reference
Based on manufacturer documentation
Model support
For model confirmation
Parts lists
Code, photo, or BOM
Availability / lead time
By model and quantity
AirTAC 6STV pilot-operated three-port, two-position solenoid valves in 0500/100/200/300 sizes. Match single-solenoid NC/NO or double-solenoid circuit, size-specific ports, voltage and electrical connection. Send valve and pilot labels, quantity and destination for quotation.
Know your model? Send it with the quantity for a quote. Not sure? Start with a photo, label or description. We help identify the model and clarify availability and lead time. Mixed parts lists are welcome too.
Match a 6STV solenoid valve
Choose the base by valve size. Confirm stations, thread, blank plates and supply scope. Check installed dimensions and electrical clearance for the actual valve assembly.
View base details and request a quote →The source identifies CPSV15 for sizes 100 and larger. Size 0500 uses CPSV10. Confirm both valve labels, electrical form and interface before replacement.
View CPSV15 and request confirmation →AirTAC 6STV official Chinese function symbols
Helpful for Model Matching:
| 3/2 function and initial state | Sizes 05 (0500 series), 1 (100), 2 (200), 3 (300). 10 single-solenoid requires NC normally closed or NO normally open. 20 double-solenoid ordering note states no selectable initial-state field. The internal-structure drawing labels 6STV120NC despite that note; double-solenoid codes bearing NC/NO require technical confirmation, not an automatic state assumption. |
| Pressure and media | Pilot-operated 3/2 valve. Operating pressure 0.15–0.8MPa; proof pressure 1.2MPa is not service pressure. Air filtered through 40 μm or finer; aluminum alloy; −20 to 70°C. Main and pilot exhaust are centralized. No separately encoded external-pilot option is published. |
| Lubrication and timing | Lubrication not required; if used, continue without interruption, ISO VG32 or equivalent. Maximum 5 cycles/s is no-load. Excitation 0.05 s or below is not a complete machine-cycle guarantee. Initial state/manual override does not certify a machine safety stop. |
| Port matrix | 0500 M5: inlet/outlet/exhaust M5. 100 M5 or 06: all M5 or all 1/8. 200 06: all 1/8; 08: inlet/outlet 1/4, exhaust 1/8. 300 10: inlet/outlet 3/8, exhaust 1/4. Inch thread blank PT; G G-thread; T NPT. M5 has no thread suffix. |
| Published flow scope | 0500 M5 area 4.25 mm²/Cv 0.25; 100 06 area 12.3/Cv 0.7; 200 08 area 17.9/Cv 1.05; 300 10 area 38.4/Cv 2.25. The 100 M5 and 200 06 are not individually rated in the source; confirm them. Values are calculated from test flow, and the model-labelled curves are laboratory results, not unconditional delivered L/min. |
| Voltage and pilot coil | A AC220V; B DC24V; C AC110V; E AC24V; F DC12V. Size 0500 specifically uses CPSV10: A/B/C/F only, D DIN connector only. CPSV10 AC2VA/DC1W. The larger pilot-coil electrical row is CPSV15 with AC2VA/DC1.2W; confirm actual pilot-coil label when replacing separately. Do not transfer a 4V or 4STV spare-coil identity. |
| Electrical limits | AC allowance +15%/−10%; DC±10%. Published protection IP65 and insulation F apply to the pilot-coil electrical table; confirm the complete installed connector/sealing arrangement. No explosion-proof claim is made. |
| Connection and wire code | Larger sizes: blank plug-in, I lead-out, D DIN connector, M M8 lead-out. Blank wire length 0.5 m or 200 length 2 m applies only to plug-in. I and M have fixed 0.5 m wires. No DIN cable-length selector is defined; lookup leaves DIN cable length for confirmation. Size 0500 restriction D overrides the general connection choices. |
| Weight and mounting | 0500 single/double 28/42 g; 100 63/89.5 g; 200101.5/129 g; 300196.5/227 g. Use correct single/double dimension table and size/port row. 6STV0510 and 0520 have no side S mounting holes; M5/06 drawings and P/Q/T ports must be read separately. |
| Base ordering details need confirmation | Base ordering: 1F–30F, blankPT/G/T NPT; dimension tables 1F–20F. P-6STV[size]M-R2 blank-plate kit. Base kit includes base, gasket and screws; plate kit includes plate and screws. One base-ordering cell prints 6T300M while its specification, dimension and blank-plate rows print 6STV300M; confirm any 6T300M input rather than silently aliasing it. |
| RFQ inputs | Send full valve and pilot/electrical labels, required 3/2 function and initial state, operating pressure/flow, voltage and connector, wire length, inlet/outlet/exhaust thread, actual mounting and manifold stations, quantity and destination. Stock, lead time and installed fit are confirmed through inquiry. |
Ordering code matching
Code format
6STV[05/1/2/3][10/20]-[port][NC/NO for 10][A/B/C/E/F][I/D/M][200][G/T]0500 D only, no E; 20 no state; 200 only plug-in; M5 no thread suffix6STV0510-M5NCBD6STV0520-M5FD6STV110-06NCB200G6STV120-06AIT6STV210-08NOEM6STV320-10BDG| 1Size | 2Control / state | 3Port | 4Voltage | 5Entry / wire | 6Thread |
|---|---|---|---|---|---|
| 05=0500, 1=100, 2=200, 3=300. | 10 single-solenoid NC/NO; 20 double-solenoid no state field. | 0500 M5; 100 M5/06; 20006/08; 30010. Match exhaust separately. | A AC220V; B DC24V; C AC110V; E AC24V; F DC12V.0500 noE. | Blank plug-in; I lead; D DIN; M M8.200 2 m only plug-in.0500 D only. | BlankPT; G G-thread; T NPT; M5 no suffix. |
If the label is incomplete, send the readable parts together with a photo.
6STV110-06NCB200G1Size
05=0500, 1=100, 2=200, 3=300.
2Control / state
10 single-solenoid NC/NO; 20 double-solenoid no state field.
3Port
0500 M5; 100 M5/06; 20006/08; 30010. Match exhaust separately.
4Voltage
A AC220V; B DC24V; C AC110V; E AC24V; F DC12V.0500 noE.
5Entry / wire
Blank plug-in; I lead; D DIN; M M8.200 2 m only plug-in.0500 D only.
6Thread
BlankPT; G G-thread; T NPT; M5 no suffix.
AirTAC 6STV pilot-operated three-port, two-position solenoid valves in 0500/100/200/300 sizes. Match single-solenoid NC/NO or double-solenoid circuit, size-specific ports, voltage and electrical connection. Send valve and pilot labels, quantity and destination for quotation.
0500 uses 05 in the valve code, M5 ports and CPSV10 with DIN connector; AC24V is not listed. Single-solenoid 10 requires NC/NO; double-solenoid 20 has no selectable initial state in the ordering note. A double-solenoid NC-labelled internal drawing conflicts with that note, so send the label/circuit for confirmation. Match connector, wire and base separately.
6STV
6STV Add other models, quantities, photos, drawings, or a BOM. One request can cover several product groups.
Build your pneumatic circuit with complementary components. Confirm dimensions and operating conditions before selecting a combination.
Product-group reference image
Connect tubing to a valve or actuator. Match tube outside diameter, port thread and seal type.
Product-group reference image
Run air lines between fittings and components. Confirm outside diameter, bend radius, pressure and temperature.
Product-group reference image
Filter and regulate supply air. Confirm filtration, pressure range and flow requirements for the connected equipment.
Send your parts list, connection sizes and operating conditions for a matching check and combined quotation.