AirTAC 7V pilot-operated 5/2 and 5/3 solenoid valves, sizes 0500–300. Match function,...
Official reference
Based on manufacturer documentation
Model support
For model confirmation
Parts lists
Code, photo, or BOM
Availability / lead time
By model and quantity
AirTAC 7V pilot-operated 5/2 and 5/3 solenoid valves, sizes 0500–300. Match function, terminal voltage, cable and threaded/tube ports; J tube versions require a matching manifold. Send the model, quantity and destination for quotation.
Know your model? Send it with the quantity for a quote. Not sure? Start with a photo, label or description. We help identify the model and clarify availability and lead time. Mixed parts lists are welcome too.
Confirm valve size, 1–20 stations, thread and blank-plate supply separately.
View base details and request a quote →AirTAC 7V specification official English reference
Helpful for Model Matching:
| Family and function | 7V0500, 7V100, 7V200 and 7V300 are pilot-operated five-port valves. 10 = 5/2 single solenoid; 20 = 5/2 double solenoid; 30C/30E/30P = 5/3 closed/exhaust/pressure centre. These are member configurations, not separate indexed pages. |
| Operating conditions | 5/2: 0.15–0.8 MPa; 5/3: 0.2–0.8 MPa. Proof pressure 1.2 MPa is not service pressure. Filtered air 40 μm; −10 to 50°C. Lubrication is not required; once used, continue with the same oil. |
| Port scope | Threaded 0500 M5, 100 1/8 inch, 200 1/4 inch, 300 3/8 inch. J tube: 0500 Ø4; 100 Ø4/6/8; 200 Ø8/10 mm; no 300 J. Thread suffix blank PT/G/T NPT on 100–300 threaded versions only; M5 and J versions have no thread suffix. |
| Tube mounting | J tube versions have oval bottom ports, require the matching 7V manifold and have no side installation hole S. A threaded stand-alone drawing is not proof that a J valve can be installed alone. |
| Electrical | A AC220V; B DC24V; C AC110V; F DC12V. No E AC24V field. AC 1.1 VA; DC 0.7 W. AC +15%/−10%, DC ±10%. F insulation, dustproof protection; no IP65 rating published. Terminal wiring can be vertical or parallel; 050 = 0.5 m, 200 = 2 m. |
| Flow and response | 5/2 Cv by 0500/100/200/300: 0.20/0.47/0.87/2.26. Published 30C threaded examples: 0.13/0.41/0.64/1.80; 30E/30P and tube-port flow require confirmation. Five/two maximum 5 cycles/s; five/three 3 cycles/s under no-load conditions. Actuating time 0.05 s or below. Flow charts are pressure-dependent, not fixed L/min ratings. |
| Bases and brackets | 7V0500M/100M/200M/300M each match their own valve size, 1–20 stations. Blank plates P-7V…M-R2. Brackets F-7V0500/100/200-LB (side) or LBD (bottom) are documented; a 300-size bracket is not listed. Base kits, valve assemblies, plates and brackets have distinct supply scope. |
| RFQ inputs | Send complete code or label, valve function, voltage, cable length, tube/thread interface, manifold and station layout, installation photo or drawing, quantity and destination. Supply scope and availability are confirmed on inquiry. |
Ordering code matching
Code format
7V[05/1/2/3][10/20/30C/30E/30P][J]-[port][A/B/C/F][050/200][G/T]J and thread suffix are mutually exclusive; port sizes depend on valve size.7V0510-M5B0507V130C-06A200G7V210J-08B0507V330E-10F200T| 1Family / size | 2Function | 3Ports | 4Voltage / wire | 5Thread |
|---|---|---|---|---|
| 7V + 05/1/2/3 = 0500/100/200/300. | 10 single 5/2; 20 double 5/2; 30C/30E/30P centre type. | Threaded 0500 M5, 100 1/8 inch, 200 1/4 inch, 300 3/8 inch. J tube: 0500 Ø4; 100 Ø4/6/8; 200 Ø8/10 mm; no 300 J. Thread suffix blank PT/G/T NPT on 100–300 threaded versions only; M5 and J versions have no thread suffix. | A/B/C/F then mandatory 050/200. No E, I, D or M electrical-entry selector. | Blank PT; G; T NPT only for threaded sizes 100–300. |
If the label is incomplete, send the readable parts together with a photo.
7V0510-M5B0501Family / size
7V + 05/1/2/3 = 0500/100/200/300.
2Function
10 single 5/2; 20 double 5/2; 30C/30E/30P centre type.
3Ports
Threaded 0500 M5, 100 1/8 inch, 200 1/4 inch, 300 3/8 inch. J tube: 0500 Ø4; 100 Ø4/6/8; 200 Ø8/10 mm; no 300 J. Thread suffix blank PT/G/T NPT on 100–300 threaded versions only; M5 and J versions have no thread suffix.
4Voltage / wire
A/B/C/F then mandatory 050/200. No E, I, D or M electrical-entry selector.
5Thread
Blank PT; G; T NPT only for threaded sizes 100–300.
AirTAC 7V pilot-operated 5/2 and 5/3 solenoid valves, sizes 0500–300. Match function, terminal voltage, cable and threaded/tube ports; J tube versions require a matching manifold. Send the model, quantity and destination for quotation.
No. J versions have oval bottom ports and require a matching manifold. Send the complete valve code, base code and installation photo; stand-alone installation and a threaded underside are not specified for J versions.
7V
7V Add other models, quantities, photos, drawings, or a BOM. One request can cover several product groups.
Build your pneumatic circuit with complementary components. Confirm dimensions and operating conditions before selecting a combination.
Product-group reference image
Connect tubing to a valve or actuator. Match tube outside diameter, port thread and seal type.
Product-group reference image
Run air lines between fittings and components. Confirm outside diameter, bend radius, pressure and temperature.
Product-group reference image
Filter and regulate supply air. Confirm filtration, pressure range and flow requirements for the connected equipment.
Send your parts list, connection sizes and operating conditions for a matching check and combined quotation.