Avoid a wrong match
- CPV15S AC or odd stations require correction/confirmation.
- Dustproof is not anIP65 declaration.
- Individual valve, wire, manifold and assembly have different supply scopes.
AirTAC sourcing reference•Solenoid Valves
SERIESCPV15S
AirTAC CPV15S Integrated 3/2 D-Sub Valve Assembly
AirTAC CPV15S integrated 3/2 valve assembly with 25-pin D-Sub. Match DC24V/DC12V, 2–20 even...
Official reference
Based on manufacturer documentation
Model support
For model confirmation
Parts lists
Code, photo, or BOM
Availability / lead time
By model and quantity
Sourcing route & inquiry details
AirTAC CPV15S integrated 3/2 valve assembly with 25-pin D-Sub. Match DC24V/DC12V, 2–20 even stations, thread and tube interface; confirm populated/blank positions and wiring. Send the assembly code, circuit, quantity and destination for quotation.
Know your model? Send it with the quantity for a quote. Not sure? Start with a photo, label or description. We help identify the model and clarify availability and lead time. Mixed parts lists are welcome too.
Request type
AirTAC originalModel matchingChina-source alternative
Match a CPV15 / CPV15S valve or assembly
Identify the matching D-Sub cable
15-pin for 6DM; 25-pin for CPV10S, CPV15S and 6D; 37-pin for 6DW. Confirm connector ends, length and actual signal/common wiring separately.
View cable details and request a quote →Drawings & dimensions
Installation Drawings & Technical Specifications
Compare installed dimensions
AirTAC CPV15S official specification
Helpful for Model Matching:
- Actual valve/assembly label and circuit
- Voltage and electrical supply/interface
- Wire or D-Sub mapping and cable scope
- Base, populated/blank stations and fitting/thread
- Quantity and destination
- Match valve versus integrated assembly scope
- Confirm actual electrical wiring, fitting and mount
- Check source contradiction before substitution
Catalogue Technical Specifications
| Identity / stations | CPV15S is a direct-acting 3/2 integrated assembly, not a CPV15 single valve or CPV10S copy. Source specification and dimensional table limit 2–20 even stations. Main ordering list prints 3F between 2F and 4F; this contradicts the explicit even-only specification. Odd station requests require confirmation rather than automatic matching. |
| Electrical / wiring | Only B DC24V or F DC12V, DC ±10%, F insulation, dustproof, DC 1.6W per valve. Integrated power via 25-pin D-Sub; confirm simultaneous energized total, cable rating, populated valves and PLC outputs. No AC220/110/24 options, no individual 050/200 wire-length field on assembly. |
| D-Sub pin reference | Source pin 13 is COM. Pins14–25 control stations1–12; pins1–8 control stations13–20; pins9–12 void. Source permits−COM/+COM polarity arrangements, not an ordering suffix. Pin13 COM corresponding conductor specified≥22AWG. Connector viewing orientation and actual PLC/cable pin mapping require confirmation before energization. |
| Air / pressure / ports | 40μm-filtered air; working 0–0.8MPa; proof 1.2MPa; −20–70°C; central inlet/exhaust. P/R ports 1/8; A push-inΦ4mm for PT/G and5/32inch for NPT. Blank PT/G G/T NPT. Do not translate the tube diameter into a threaded A port or copy CPV10S fittings. |
| Supply / replacement / blank positions | Assembly code CPV15S[B/F][even2–20]F[G/T]. Separate base code CPV15S[even2–20]F[G/T] lacks voltage and does not identify an electrically specified complete assembly. Replacement valve CPV15BP/FP uses P manual override. P-CPV15S-R2 kit includes blank plate, gasket, screw; component ordering note includes valve, manifold andblank plate but actual populated positions and cable inclusion must be agreed. |
| Dimensions / installation | Dedicated 15S installed drawings show 63mm end envelope,60mm installed height,15.5mm pitch. A lengths2/4/6/8/10/12/14/16/18/20stations=46.5/77.5/108.5/139.5/170.5/201.5/232.5/263.5/294.5/325.5mm; B=A−8mm. Two M4 manifold mounting bolts, valve M2.5 and blank plate countersunk M2.5 per source. Confirm connector, cable bending and mounting clearance. |
| Flow / duty boundary | Integrated specification does not individually publish guaranteed assembly flow or cyclic frequency. CPV15 body flow from its distinct valve source needs path clarification; it is not an assembly capacity guarantee. Manual override and blank replacement need actual circuit isolation and qualified machine commissioning. |
Common Model Codes & Configurations:Useful for an RFQ
CPV15SB2FCPV15SF10FGCPV15SB20FT
Technical reference & selection notes
Ordering Codes, Fit Verification & Specifications
Ordering code matching
Match each code segment
Code format
CPV15S[B/F][2/4/6/8/10/12/14/16/18/20]F[G/T]Use the full code and confirm supply scopeCPV15SB2FCPV15SF10FGCPV15SB20FT| 1Product identity | 2Voltage | 3Manual / stations | 4Wire / thread |
|---|---|---|---|
| CPV15S electrically specified integrated assembly. | B DC24V or F DC12V only. | The ordering table lists even station counts from 2–20; odd counts require confirmation. | Blank PT/G G/T NPT; 25-pin D-Sub, no wire-length selector. |
About CPV15S
AirTAC CPV15S integrated 3/2 valve assembly with 25-pin D-Sub. Match DC24V/DC12V, 2–20 even stations, thread and tube interface; confirm populated/blank positions and wiring. Send the assembly code, circuit, quantity and destination for quotation.
Matching Questions
Can I use a single CPV15 code to request an integrated assembly?
A CPV15 single valve and a CPV15S integrated D-Sub assembly have different scope. Specify assembly voltage, even station count, occupied/blank positions, fittings and wiring. A valve-only replacement or manifold-only code does not define a complete wired assembly.
CPV15S
Include this series in a project RFQ
CPV15S Add other models, quantities, photos, drawings, or a BOM. One request can cover several product groups.
Confirm inspection requirements before quotationSpecify shipping preferenceConfirm timing in the quotationOcean & Rail Available
COMPANION PRODUCTS
Products to use together
Build your pneumatic circuit with complementary components. Confirm dimensions and operating conditions before selecting a combination.
Connect the air line
Product-group reference image
PneuPart tube fittings
Connect tubing to a valve or actuator. Match tube outside diameter, port thread and seal type.
View companion product
Route the air supply
Product-group reference image
PneuPart pneumatic tubing
Run air lines between fittings and components. Confirm outside diameter, bend radius, pressure and temperature.
View companion product
Prepare the air supply
Product-group reference image
Air filters & regulators
Filter and regulate supply air. Confirm filtration, pressure range and flow requirements for the connected equipment.
View companion product
Planning a Complete Circuit or Multi-Item BOM?
Send your parts list, connection sizes and operating conditions for a matching check and combined quotation.