AirTAC BSED Double-Rod Static-Locking Cylinders
AirTAC BSED double-rod static-locking cylinders. Confirm static holding load,release pressure...
Official reference
Based on manufacturer documentation
Model support
For model confirmation
Parts lists
Code, photo, or BOM
Availability / lead time
By model and quantity
Sourcing route & inquiry details
AirTAC BSED double-rod static-locking cylinders. Confirm static holding load,release pressure and control sequence;lock only after motion has stopped. Send code,label or installed drawing with bore,stroke,mounting,quantity and destination for quotation.
Know your model? Send it with the quantity for a quote. Not sure? Start with a photo, label or description. We help identify the model and clarify availability and lead time. Mixed parts lists are welcome too.
Match an SE / BSE cylinder
Part of the BSE Series family.
View family overview →Installation Drawings & Technical Specifications
AirTAC BSED official bsed dimensions
Helpful for Model Matching:
- Full code,label or installed drawing
- Bore,main stroke andadjustment if SEJ
- Magnet,mounting andthread
- Rod/seal version forSE orrelease port/pressure for BSE
- Load,speed,environment and control sequence
- Quantity and destination
- Confirm actualfamily/function,installed length and mount
- Check bore,stroke,adjustment,rod/thread and magnet
- ForBSE verify static load,pressure balance and release timing
- Confirm construction-specific accessory compatibility
Catalogue Technical Specifications
| BSE family / function | BSE single rod andBSED double rod ISO15552 profile cylinders with integrated spring/clamp-plate static rod lock. Locks either direction independently of piston travel direction. Pneumatic or manual release shown. This is distinct from standard SE pneumatic cylinder and not a dynamic brake or certified safety stop. |
| BSE operating / holding | Cylinder and lock-release operating pressure0.15–0.7MPa;proof1.5MPa. Standard temperature−20to70°C. Bore32/40/50/63/80/100/125mm. Static holding force600/900/1400/2200/3600/5500/8600N respectively;not theoretical thrust or guaranteed load capacity. |
| BSE ports / speed / strokes | Cylinder ports1/8,1/4,1/4,3/8,3/8,1/2,1/2 by bore;separate lock-release portG1/8. Speeds32–10030–800mm/s,12530–500. Standard stroke32 up to500/40 up to800/others up to1000;published maximum32=700,40=800,50–125=1000. Custom stroke requires manufacturer confirmation. |
| BSE ordering | BSE/BSED[bore]×[stroke][S][mount][G]. Blank no magnet/S magnet;blankPT/G G cylinder-thread field. No published rod-material or seal suffix inBSE ordering matrix;do not importSE C/H/N fields. Lock-release G1/8 separately fixed. |
| Locking / release sequence | Lock only after piston motion has stopped. Never stop/brake a moving piston with rod lock. Equalize both cylinder chamber pressures before release;unbalanced release may cause sudden unintended motion. Source sequence diagram specifies at least0.5s from lock to release and0–0.5s from release to motion stage;controller/load/timing must be confirmed from actual circuit. |
| BSE mounting / conflicts | BSE blank/LB/FA/FB/CA/CB/CR/TC;no FTC compatibility stated. BSED ordering matrix includesFB but accessory-selection matrix marksFB unavailable:holdBSED-FB for technical confirmation,do not falsely declare compatible. BSED auto-matches blank/LB/FA/TC. CB/CR absent onBSED. TC requires matchedTCM brackets and fixed position. |
| BSE materials / sensors | Dedicated structure anddimensions physical6/printed17. The listed rod is plated S45C; a stainless C option is not specified. Source points sensor details printed409;shared tableCMSE/DMSE with magnet requirement. Rod lock adds body length and G1/8 release port;standard SE overall dimensions cannot replace BSE. |
| BSE fit examples | BSE80:basic A321mm +main stroke,rod threadM20×1.5,body port3/8,lockG1/8,static holding3600N. BSED80:A403mm +2×main stroke. These are drawing-defined length references,not all cap/rod total dimensions;verify installed drawing. |
Ordering Codes, Fit Verification & Specifications
Ordering code matching
Match each code segment
Code format
BSE/BSED [bore]×[stroke][S][mount][G]Construction-specific field limits andcustom strokes require confirmationBSED80X100SFA| 1Family / function | 2Bore / stroke | 3Material / adjustment | 4Magnet / mount | 5Threads / lock release |
|---|---|---|---|---|
| SE baseline;SED double rod;SEJ double rod adjustable;BSE/BSED static-locking independent family. | 32/40/50/63/80/100/125;only published standard combinations auto-matched. | SE rod A/B/C English-only C,seals H/N;SEJ adjustment mandatory;BSE has neither rod nor seal optionalfield. | Blank no magnet/S;mounting options vary by construction. | Cylinder blankPT/G;BSE separate releaseG1/8;noNPT. |
Quick check
Can BSE stop a moving load andcan standard SE dimensions confirm replacement?
BSE is a static rod-locking cylinder;only engage the lock after motion stops,then equalize chamber pressure before release. It is not a dynamic brake orconfirmed safety stop. StandardSE,SED,SEJ andlocking BSE/BSED have different envelopes,ports and mounts;send actual drawing/code,load and control circuit for confirmation.
BSED
Include this series in a project RFQ
BSED Add other models, quantities, photos, drawings, or a BOM. One request can cover several product groups.
Products to use together
Build your pneumatic circuit with complementary components. Confirm dimensions and operating conditions before selecting a combination.
Product-group reference image
Directional control valves
Switch the pneumatic circuit. Select the valve function, flow capacity, port size and control signal for the application.
Product-group reference image
PneuPart SL speed controllers
Control actuator air flow. Confirm thread, tube size, flow direction and required flow rate.
Product-group reference image
PneuPart tube fittings
Connect tubing to a valve or actuator. Match tube outside diameter, port thread and seal type.
Product-group reference image
PneuPart pneumatic tubing
Run air lines between fittings and components. Confirm outside diameter, bend radius, pressure and temperature.
Planning a Complete Circuit or Multi-Item BOM?
Send your parts list, connection sizes and operating conditions for a matching check and combined quotation.