AirTAC SAUD Double-Rod Profile Cylinders
Double-rod profile cylinder; confirm both rod ends and its own overall-length drawing. Send...
Official reference
Based on manufacturer documentation
Model support
For model confirmation
Parts lists
Code, photo, or BOM
Availability / lead time
By model and quantity
Sourcing route & inquiry details
Double-rod profile cylinder; confirm both rod ends and its own overall-length drawing. Send full code, label or installation drawing with quantity and destination for quotation.
Know your model? Send it with the quantity for a quote. Not sure? Start with a photo, label or description. We help identify the model and clarify availability and lead time. Mixed parts lists are welcome too.
Match an SAU cylinder model
Part of the SAU Series family.
View family overview →Installation Drawings & Technical Specifications
AirTAC SAUD official sau specifications strokes
Helpful for Model Matching:
- Full model code or label
- Bore, working stroke and separate adjustment
- Mounting and rod-end / port drawing
- Magnet, seal and temperature where published
- Valve voltage, port and energized motion where applicable
- Quantity and destination
- Confirm functional derivative and its own dimensions
- Confirm working stroke, adjustment and mounting
- Separate rod end, cylinder port and valve port
- Confirm valve voltage, port and required energized motion
Catalogue Technical Specifications
| Cylinder pressure / proof | 0.15–1.0 MPa operating; 1.5 MPa proof. Proof is not working pressure. |
| Medium / temperature / speed | 40 μm filtered air; −20–70°C; 30–800 mm/s; double acting; adjustable pneumatic cushion. |
| Cylinder ports | 32: 1/8; 40/50: 1/4; 63/80: 3/8; 100: 1/2. Blank PT / optional G; no NPT. |
| Rod end | 32: M10×1.25; 40: M12×1.25; 50/63: M16×1.5; 80/100: M20×1.5. Rod-end thread is not air port. |
| Cushion stroke | 32/40/50/63: 21; 80: 28; 100: 29 mm; separate from working stroke. |
| Magnet / sensors | Blank without magnet; S with magnet. CMSG / DMSG / EMSG separately selected, magnetic cylinders only. Magnet/non-magnet dimensions same. |
| Standard / fit | AirTAC enterprise standard profile cylinder without tie rods, shorter than ISO15552 at same bore; do not describe it as ISO15552 or assume interchangeability. Compare mounting, length, rod end and air port. |
| Stroke tolerance | 0–250: +1/0; 251–1000: +1.5/0; 1001–1500: +2/0 mm. No extrapolation above 1500. |
| Accessories | Mounting accessories same as SC, exact F-SC bore codes in official table. LB and rod joints carbon steel, FA/FB aluminium alloy, CA/CB cast steel. SAI TC/FTC mounting options do not apply; bracket materials vary by type. |
| Thrust / load | Published thrust is N at pressure and push/pull effective area, not payload kg. Check load, side-load avoidance and cushion. |
| Bore / enumerated strokes | 32/40/50/63/80/100. 25/50/75/80/100/125/150/160/175/200/250/300/350/400/450/500 mm; bore32 stops500; bores40–100 also600/700/800/900/1000. |
| Maximum standard / maximum stroke | 32: 1000/1800; 40/50: 1200/1800; 63/80/100: 1500/1800 mm. Maximum standard exceeds enumerated list; unlisted/nonstandard stroke needs confirmation. |
| Seal / absent fields | Blank TPU; H Viton; N NBR. H high-temperature choice −10–150°C; not ordinary seals. No rod material A/B field published. |
| Double-rod mounting | Blank / LB / FA only; no FB / CA / CB or TC/FTC. |
Ordering Codes, Fit Verification & Specifications
Ordering code matching
Match each code segment
Code format
SAUD50X100SMatch only fields published for this derivativeSAUD50X100SSAUD100X500SFAHG| 1Model | 2Bore / main stroke | 3Magnet | 4Mounting | 5Seal material | 6Thread |
|---|---|---|---|---|---|
| SAUD functional construction | Use enumerated bore and stroke combinations; unlisted strokes require confirmation. | Blank without magnet; S with magnet. | Blank / LB / FA only. | Blank TPU; H Viton; N NBR. | Blank PT; G optional. No NPT field. |
Quick check
Which function and interfaces should I confirm?
Double-rod profile cylinder; confirm both rod ends and its own overall-length drawing. Send full code, label or installation drawing with quantity and destination for quotation. Compare this derivative with its own drawing before replacement; Enterprise standard alone does not guarantee fit.
SAUD
Include this series in a project RFQ
SAUD Add other models, quantities, photos, drawings, or a BOM. One request can cover several product groups.
Products to use together
Build your pneumatic circuit with complementary components. Confirm dimensions and operating conditions before selecting a combination.
Product-group reference image
Directional control valves
Switch the pneumatic circuit. Select the valve function, flow capacity, port size and control signal for the application.
Product-group reference image
PneuPart SL speed controllers
Control actuator air flow. Confirm thread, tube size, flow direction and required flow rate.
Product-group reference image
PneuPart tube fittings
Connect tubing to a valve or actuator. Match tube outside diameter, port thread and seal type.
Product-group reference image
PneuPart pneumatic tubing
Run air lines between fittings and components. Confirm outside diameter, bend radius, pressure and temperature.
Planning a Complete Circuit or Multi-Item BOM?
Send your parts list, connection sizes and operating conditions for a matching check and combined quotation.