TSAI combines a standard cylinder with a two-guide-rod frame. Choose M brass bearing or L...
Official reference
Based on manufacturer documentation
Model support
For model confirmation
Parts lists
Code, photo, or BOM
Availability / lead time
By model and quantity
TSAI combines a standard cylinder with a two-guide-rod frame. Choose M brass bearing or L linear bearing, then match listed bore/stroke, magnet and PT/G thread. Send actual load F, lever distance S and installation drawing with quantity and destination for quotation and fit confirmation.
Know your model? Send it with the quantity for a quote. Not sure? Start with a photo, label or description. We help identify the model and clarify availability and lead time. Mixed parts lists are welcome too.
Choose a type; send a model or photo if unsure.
TSAIM
Brass-bearing guide frame; radial load and torsional stiffness
TSAIL
Linear-bearing guide frame; precision and low friction
Send the model, quantity and destination. For multiple items, attach a parts list or BOM.
Match a TSAI Model and Guide Requirement
AirTAC TSAI compendium official reference
Helpful for Model Matching:
| Identity / bearings | SAI standard cylinder plus a separate dual-guide-rod frame. M is brass bearing, not steel-ball; L is linear bearing. The two guide rods do not make it a double piston-rod cylinder. |
| Bearing decision | M: radial load resistance and greater torsional stiffness. L: push-up action, high precision/load demand and low friction. Use the separate M/L maximum-load curves; do not assume one is always stronger. |
| Standard stroke / ordering | Bores32/40/50/63/80/100; all list50/100/150/200/250/300/350/400/450/500mm only. TSAI M/L + bore×listed stroke + optionalS + optionalG. Blank no magnet and PT; noT or mounting suffix here. |
| Pressure / air / temperature | Double acting,40μm filtered air,0.15–1.0MPa operating,1.5MPa proof,−20..70°C,30–500mm/s. Proof is not working pressure; lubrication not stated here. |
| Ports / cushion / tolerance | 32=1/8;40/50=1/4;63/80=3/8;100=1/2,PT blank orG. Variable cushion. Stroke0–250 tolerance+1/0mm;>250 +1.5/0. Tolerance does not publish additional standard strokes. |
| Cylinder thrust / guide load | At0.5MPa push/pullN:32 402/345;40 628/527.5;50 981.5/824.5;63 1558.5/1401.5;80 2513/2268;100 3926.5/3681. The source thrust table includes0.1MPa but the operating minimum is0.15MPa. Thrust is not guide load capacity or payloadkg. |
| Load curve condition | Maximum guide load F(N) depends on M/L bearing, bore and diagram lever distanceS(mm), plotted0–500mm. S here is the load distance, not the magnet suffix. No scalar payload, moment or automatic interpolation approval; send actual load/orientation/lever distance and installation drawing. |
| Separate frame / non-standard | F-TSAI M/L bore×stroke is guide-frame accessory, not complete cylinder. Separate frame standard list matches published strokes. For a non-standard cylinder, source says use frame of upper standard stroke; exampleSAI32×160 +F-TSAIM32×200. Cylinder A+160 and frame AC+200 are independent lengths; original combination requires confirmation. |
| Sensor holders / switches | S magnetic cylinder includes2sensor holders; separately ordered guide frame also includes2holders. F-TSAI32E=32/40;F-TSAI50E=50/63;F-TSAI80E=80/100. CMSE/DMSE shown as switch choices; holders do not mean switches included. No absent-magnet switch promise. |
| Dimensions / material | TSAIM/TSAIL shared drawing; parenthesized values belong to TSAIL, notably guide diameterD32/40 20(16),80/100 30(25). Missing dimension cells stay unspecified. Confirm multiple-direction threaded/through-hole mounting and A+stroke/AC+stroke/AF+stroke. Material drawing based on a certain bore; do not use as universal BOM. |
Ordering code matching
Code format
TSAI-[M/L]-[bore]×[listed stroke]-[S]-[G]Complete cylinder; F-TSAI frame is a separate accessoryTSAIM40×100STSAIL80×200SGTSAIM32×50| 1Bearing | 2Bore / standard stroke | 3Magnet / thread |
|---|---|---|
| M brass / L linear | 32/40/50/63/80/100;50–500 in steps50 | Blank no magnet orS; blankPT orG; noT |
If the label is incomplete, send the readable parts together with a photo.
TSAI M 40 × 100 S GMBearing
Brass bearing; L linear bearing
40×100Bore / stroke
Published bore and standard stroke inmm
S GMagnet / thread
S magnet; G thread, blankPT
TSAI combines a standard cylinder with a two-guide-rod frame. Choose M brass bearing or L linear bearing, then match listed bore/stroke, magnet and PT/G thread. Send actual load F, lever distance S and installation drawing with quantity and destination for quotation and fit confirmation.
M is brass bearing; L is linear bearing. Compare their separate maximum-load curves with the actual force and lever distance.
F-TSAI is a separate guide-frame accessory. For a non-standard cylinder stroke, confirm the upper standard frame stroke and both installation lengths before quotation.
TSAI
TSAI Add other models, quantities, photos, drawings, or a BOM. One request can cover several product groups.
Build your pneumatic circuit with complementary components. Confirm dimensions and operating conditions before selecting a combination.
Product-group reference image
Switch the pneumatic circuit. Select the valve function, flow capacity, port size and control signal for the application.
Product-group reference image
Control actuator air flow. Confirm thread, tube size, flow direction and required flow rate.
Product-group reference image
Connect tubing to a valve or actuator. Match tube outside diameter, port thread and seal type.
Product-group reference image
Run air lines between fittings and components. Confirm outside diameter, bend radius, pressure and temperature.
Send your parts list, connection sizes and operating conditions for a matching check and combined quotation.