AirTAC ACED Double-Rod Compact Cylinder
ACED is the double-rod ACE-family configuration. Send both rod-end details, bore, stroke and...
Official reference
Based on manufacturer documentation
Model support
For model confirmation
Parts lists
Code, photo, or BOM
Availability / lead time
By model and quantity
Sourcing route & inquiry details
ACED is the double-rod ACE-family configuration. Send both rod-end details, bore, stroke and mounting geometry for an RFQ.
Know your model? Send it with the quantity for a quote. Not sure? Start with a photo, label or description. We help identify the model and clarify availability and lead time. Mixed parts lists are welcome too.
Match an ACE model code
Enter the code from the label. Spaces and ×/x formats work.
Part of the ACE Series family.
View family overview →Installation Drawings & Technical Specifications
ACED double-rod drawing and shared ACED/ACEJ dimension table
Helpful for Model Matching:
- Full ACED code or cylinder label
- Bore and working stroke
- Rod-end, mounting, and installed clearance
- Magnet option and sensor requirement where applicable
- Compare the matching configuration, bore, stroke, mounting and installed clearance
- Send a label or installed photo if the model is incomplete
Catalogue Technical Specifications
| Family | ACE compact cylinder family |
| Configuration | Double rod |
| Published bores | 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 mm |
| Operating pressure | 0.15–1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Working medium | Air filtered by a 40 μm filter element |
| Temperature | −20 to +70 °C |
| Speed range | 30–500 mm/s |
| Standard strokes | 5–300 mm depending on bore; see standard-stroke table |
| Port sizes | Ø12–25: M5×0.8; Ø32–100: 1/8. PT standard; G option. |
| Cushion | Bumper |
| Stroke tolerance | ≤100 mm: +1.0/0 mm; >100 mm: +1.5/0 mm |
Ordering Codes, Fit Verification & Specifications
Ordering code matching
Match each code segment
Code format
ACED [bore] × [stroke] [S] [B] [mount] [G]Published code layout; optional positions depend on the selected configurationACED 20 × 30 S B [PT]| ①Model | ②Bore (mm) | ③Stroke | ④Options | ⑤Mounting | ⑥Port thread |
|---|---|---|---|---|---|
| ACED: Double rod | 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 mm | Required travel; compare the published stroke table and installed cylinder. | S: magnetic option; B: male rod-end option. | FA / FB; blank: no accessories | Blank: PT; G: G thread option where shown in the code guide. |
Quick check
What distinguishes ACED in the ACE family?
ACED has rods on both sides. It is structurally different from standard ACE and must be checked against the installed mechanical interfaces.
ACED
Include this series in a project RFQ
ACED Add other models, quantities, photos, drawings, or a BOM. One request can cover several product groups.
Products to use together
Build your pneumatic circuit with complementary components. Confirm dimensions and operating conditions before selecting a combination.
Product-group reference image
Directional control valves
Switch the pneumatic circuit. Select the valve function, flow capacity, port size and control signal for the application.
Product-group reference image
PneuPart SL speed controllers
Control actuator air flow. Confirm thread, tube size, flow direction and required flow rate.
Product-group reference image
PneuPart tube fittings
Connect tubing to a valve or actuator. Match tube outside diameter, port thread and seal type.
Product-group reference image
PneuPart pneumatic tubing
Run air lines between fittings and components. Confirm outside diameter, bend radius, pressure and temperature.
Planning a Complete Circuit or Multi-Item BOM?
Send your parts list, connection sizes and operating conditions for a matching check and combined quotation.