AirTAC TACED Non-Rotating Double-Rod Compact Cylinder with Yoke
TACED combines non-rotating guided motion with a double-rod arrangement in the ACE...
Official reference
Based on manufacturer documentation
Model support
For model confirmation
Parts lists
Code, photo, or BOM
Availability / lead time
By model and quantity
Sourcing route & inquiry details
TACED combines non-rotating guided motion with a double-rod arrangement in the ACE compact-cylinder family. Send the complete code, stroke, guide arrangement and both rod-end details for an RFQ.
Know your model? Send it with the quantity for a quote. Not sure? Start with a photo, label or description. We help identify the model and clarify availability and lead time. Mixed parts lists are welcome too.
Match an ACE model code
Enter the code from the label. Spaces and ×/x formats work.
Part of the ACE Series family.
View family overview →Installation Drawings & Technical Specifications
TACED non-rotating with yoke installation drawing
Helpful for Model Matching:
- Full TACED code or cylinder label
- Bore and working stroke
- Rod-end, mounting, and installed clearance
- Magnet option and sensor requirement where applicable
- Compare the matching configuration, bore, stroke, mounting and installed clearance
- Non-rotating cylinder with yoke; not a multi-position cylinder
- Published rod thread is female; check guide arrangement and mounting
Catalogue Technical Specifications
| Family | ACE compact cylinder family |
| Configuration | Double rod, non-rotating with yoke |
| Published bores | 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 mm |
| Operating pressure | 0.15–1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Working medium | Air filtered by a 40 μm filter element |
| Temperature | −20 to +70 °C |
| Speed range | 30–500 mm/s |
| Standard strokes | Ø12: 5–50 mm; Ø16: 5–75 mm; Ø20–100: 5–100 mm (listed strokes) |
| Port sizes | Ø12–25: M5×0.8; Ø32–100: 1/8. PT standard; G option. |
| Cushion | Bumper |
| Stroke tolerance | ≤100 mm: +1.0/0 mm; >100 mm: +1.5/0 mm |
Ordering Codes, Fit Verification & Specifications
Ordering code matching
Match each code segment
Code format
TACED [bore] × [stroke] [S] [mount] [G]Published code layout; optional positions depend on the selected configurationTACED 20 × 30 S [PT]| ①Model | ②Bore (mm) | ③Stroke | ④Options | ⑤Mounting | ⑥Port thread |
|---|---|---|---|---|---|
| TACED: Double rod, non-rotating with yoke | 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 mm | Required travel; compare the published stroke table and installed cylinder. | S: magnetic option. Female rod thread only in the published guide. | FA / FB / CA / CB / CR / FTC; depends on bore | Blank: PT; G: G thread option where shown in the code guide. |
Quick check
What distinguishes TACED in the ACE family?
TACED is a double-rod, double-acting non-rotating cylinder with a yoke. Compare the guide arrangement and clearance at both rod ends.
TACED
Include this series in a project RFQ
TACED Add other models, quantities, photos, drawings, or a BOM. One request can cover several product groups.
Products to use together
Build your pneumatic circuit with complementary components. Confirm dimensions and operating conditions before selecting a combination.
Product-group reference image
Directional control valves
Switch the pneumatic circuit. Select the valve function, flow capacity, port size and control signal for the application.
Product-group reference image
PneuPart SL speed controllers
Control actuator air flow. Confirm thread, tube size, flow direction and required flow rate.
Product-group reference image
PneuPart tube fittings
Connect tubing to a valve or actuator. Match tube outside diameter, port thread and seal type.
Product-group reference image
PneuPart pneumatic tubing
Run air lines between fittings and components. Confirm outside diameter, bend radius, pressure and temperature.
Planning a Complete Circuit or Multi-Item BOM?
Send your parts list, connection sizes and operating conditions for a matching check and combined quotation.