Manual 2×
Reference setting range: 0.2–2.0 MPa or version-specific
Body size, port standard and curve must be matched to the code.
PneuPart · SERIES VBA
VBA pneumatic pressure boosters
Select the booster function first, then match body size, port standard, pressure point, flow and tank requirement. A catalogue ratio does not guarantee a fixed outlet pressure or flow under every condition.
Three function members within one family
Pilot 2×
Reference setting range: 0.2–1.0 MPa reference
Body size, port standard and curve must be matched to the code.
Manual 2–4×
Reference setting range: 0.2–2.0 MPa or version-specific
Body size, port standard and curve must be matched to the code.
Reference body examples include VBA10/11, 20/22, 40/42/43. The catalogue does not define every cross-combination; unlisted versions remain welcome for confirmation.
Confirm your model or requirements
The fields describe a technical request; they do not calculate a certified booster or tank selection. Flow values must be tied to their pressure point and test basis.
Request model & availability confirmationMatch the tank separately
Catalogue references list VBAT05, 10, 20 and 38 L in carbon-steel and stainless versions. Direct pairings shown include VBA1 with 05/10, VBA2 with 10/20 and VBA4 with 38. Rating and material are version-specific; do not assume the same pressure for every capacity.
Installation & safety confirmation
- Match the drawing for body size, port standard, gauge, silencer and elbow; accessories change the installation envelope.
- Confirm relief, residual pressure, air quality, mounting and local pressure-equipment obligations with the supplier and destination requirements.
- Factory technical documentation, dimensional drawings and compliance certificates are confirmed for the selected configuration upon quotation.
PneuPart · Technical documents
Drawing and configuration
The form schematic shows the selection features. Dimensional, port and installation drawings are supplied against the confirmed delivery version.
Shape and connection
ShownShown on this page; not to scale.
Dimensional drawing
By enquiryRequest for the confirmed size and port variant.
Selection / ordering drawing
By enquiryConfirm code, options and supply scope together.
Send the model code, a photo or existing mounting dimensions together; a complete model is not required to start confirmation.
Request drawing