01
Send what you have
A model, photo, description or parts list is enough to start. Add quantity and destination where known.
Control Components / Solenoid Valves
Solenoid Valves
29 AirTAC series for original sourcing, model quotation, replacement matching, or China-source alternative review when accepted.
29 Series
SERIES3V
AirTAC 3V / 4V / 4M FB Solenoid Valves
Models:3V106A-FB3V1M5B-FB3V21008NOA-FB+4
SERIES3V100
AirTAC 3V100 Three-Port Solenoid Valves
Models:3V1003V1103V120+3
SERIES3V1
AirTAC 3V1 Direct-Acting Solenoid Valves
Models:3V13V1-M5-B3V1-06-A-I-G+2
SERIES3V200
AirTAC3V200 Three-Port Solenoid Valves
Models:3V2003V2103V220+3
SERIES3V2M
AirTAC 3V2M Direct-Acting Valves and Manifold Groups
Models:3V2M3V2M-NC-B3V2M-NO-A-I+3
SERIES3V2
AirTAC3V2 Direct-Acting Three-Port Solenoid Valves
Models:3V23V2063V208+3
SERIES3V300
AirTAC 3V300 Three-Port Solenoid Valves
Models:3V3003V310-08-NC-B3V310-10-NO-BIG+1
SERIES3V3
AirTAC 3V3 Direct-Acting Three-Port Solenoid Valves
Models:3V33V308-NC-B3V308-NO-BIG+1
SERIES4M
AirTAC 4M NAMUR 5/2 Solenoid Valves
Models:4M310-10A4M220-08BIG4M110-M5F
SERIES4STV
AirTAC 4STV 3/2 Solenoid Valves
Models:4STV110-06NCB4STV120-M5A4STV210-08NOCIG+1
SERIES4SV
AirTAC 4SV 5/2 and 5/3 Solenoid Valves
Models:4SV110-06B4SV220-08AIG4SV330C-10B+1
SERIES4V-100
AirTAC 4V100 5/2 and 5/3 Solenoid Valves
Models:4V110-M5B4V110-06B4V120-06AIT+3
SERIES4V-200
AirTAC 4V200 5/2 and 5/3 Solenoid Valves
Models:4V210-06B4V210-08B4V220-08AIT+3
SERIES4V-300
AirTAC 4V300 5/2 and 5/3 Solenoid Valves
Models:4V310-10B4V320-08AIT4V330C-10FG+2
SERIES4V-400
AirTAC 4V400 5/2 and 5/3 Solenoid Valves
Models:4V410-15B4V420-15AIT4V430C-15FG+2
SERIES5V
AirTAC 5V 5/2 and 5/3 Solenoid Valves
Models:5V110-M5B0505V110-06A2005V210-08B050+4
SERIES6DM / 6D / 6DW
AirTAC 6DM / 6D / 6DW Integrated Valve Manifolds
Models:6DM1H 8F-J06 B S4 D1 C1 E1 P16D1H 8F-J06 B S1 D2 C2 E2 P16DW1H 18F-J06 B S5 D8 C2 E1 P2+3
SERIES6STV
AirTAC 6STV Three-Port Two-Position Solenoid Valves
Models:6STV0510-M5NCBD6STV0520-M5FD6STV110-06NCB200G+3
SERIES6SV
AirTAC 6SV Slim-Body 5/2 and 5/3 Solenoid Valves
Models:6SV210-08B6SV230C-08BI6SV0510-M5B+1
SERIES7SV
AirTAC 7SV 5/2 and 5/3 Solenoid Valves
Models:7SV0510-M5B7SV0530C-M5FM7SV110-06A200G+2
SERIES7V
AirTAC 7V 5/2 and 5/3 Solenoid Valves
Models:7V0510-M5B0507V130C-06A200G7V210J-08B050+1
SERIESB03
AirTAC B03 Explosion-Proof Valve Configurations and CFB092 Coils
Models:B03-3V106AB03-3V21008NOBB03-3V22006B+3
SERIESCPSV15
AirTAC CPSV15 Miniature 3/2 Solenoid Pilot Valves
Models:CPSV15B-050CPSV15A-200CPSVI15C-050+1
SERIESCPV10S
AirTAC CPV10S Integrated 3/2 Valve Islands
Models:CPV10S J04 B 12FCPV10S J03 F 4F
SERIESCPV10
AirTAC CPV10 10 mm 3/2 Micro-Solenoid Valves
Models:CPV10BP-050CPV10AP-200
SERIESCPV15S
AirTAC CPV15S Integrated 3/2 D-Sub Valve Assembly
Models:CPV15SB2FCPV15SF10FGCPV15SB20FT
SERIESCPV15
AirTAC CPV15 Miniature 3/2 Solenoid Valve
Models:CPV15BP-050CPV15AP-200CPV15FP-050
SERIESESV
AirTAC ESV ISO5599-1 Solenoid Valves
Models:ESV210BESV320AIESV430CBIW+1
SERIESF-DSUB15 / F-DSUB25 / F-D
AirTAC F-DSUB15/25/37 Valve-Island Cables
Models:F-DSUB15S150F-DSUB25F200F-DSUB25M500+1
Technical Specification & Engineering
AirTAC-Compatible Solenoid Valve Engineering & Selection Matrix
Industrial pneumatic directional control valves require exact alignment of flow factor (Cv), response speed, port threading (BSPT/NPT), and electrical coil specifications. Compare key series below for direct factory replacement or machine retrofit.
| Series | Port Size | Flow Factor (Cv / L/min) | Pressure Range | Response / Duty | Typical Industrial Application |
|---|---|---|---|---|---|
| 4V100 Series (5/2, 5/3) | M5 x 0.8, 1/8" BSPT | Cv 0.67 ~ 0.89 (~250 L/min) | 0.15 ~ 0.80 MPa | < 0.05s / 100% ED (Continuous) | Miniature actuators, bore ≤ 32mm, electronic PCB assembly |
| 4V200 Series (5/2, 5/3) | 1/8", 1/4" BSPT / G | Cv 0.89 ~ 1.67 (~550 L/min) | 0.15 ~ 0.80 MPa | < 0.05s / Up to 5 Hz cycling | General automation, SC/SDA cylinders 32~63mm, packaging machines |
| 4V300 Series (5/2, 5/3) | 1/4", 3/8" BSPT / G | Cv 1.67 ~ 2.78 (~950 L/min) | 0.15 ~ 0.80 MPa | < 0.06s / High-flow continuous | Heavy-duty cylinders 63~100mm, conveying lines, stamping feeder |
| 4V400 Series (5/2, 5/3) | 3/8", 1/2" BSPT / G | Cv 2.78 ~ 4.45 (~1600 L/min) | 0.15 ~ 0.80 MPa | < 0.08s / High-volume exhaustion | Large bore cylinders 100~200mm, bulk material handling, presses |
| 3V100 / 3V200 (3/2-way) | M5, 1/8", 1/4" BSPT | Cv 0.55 ~ 1.25 (~400 L/min) | 0.15 ~ 0.80 MPa | < 0.04s / Spring-return NO/NC | Single-acting cylinders, vacuum pilot release, pneumatic clutches |
Key Technical Procurement & Engineering Guidelines
Flow Sizing & Actuator Speed Matching
Calculate required flow factor Cv = (Piston Area × Stroke × Cycles/min × Pressure Ratio) / 60. Sizing a valve too small causes sluggish cylinder movement; sizing too large wastes energy and increases air consumption.
Filtration & Lubrication Standard
Supply air must be filtered to 40μm (5μm recommended for pilot stages). Modern NBR/HNBR spool seals do not require lubrication; if lubrication is started with ISO VG32 turbine oil, it must be continued continuously.
Voltage & Surge Protection
Standard coils support DC24V (±10%, ~3W/4.8W) and AC220V/110V (50/60Hz). Specify DIN 43650 connector with integrated LED indicator and varistor surge suppressor to protect PLC output cards.
Manifold Station Configuration (100M~400M)
Individual sub-base or multi-station centralized manifold blocks consolidate P (supply) and R/S (exhaust) lines into unified ports, reducing piping clutter and enabling centralized mufflers.
Technical Procurement & Interchange FAQ
Are AirTAC-compatible 4V series interchangeable with SMC SY / VFS series?▼
Functionally and pneumatically yes: identical 5/2 or 5/3 fluid power circuits, port sizes (1/8"-1/2"), and 0.15-0.8 MPa operating envelopes. However, manifold sub-base screw pitch and connector pins differ. Our engineering team provides direct interchange confirmation and CAD models.
What is the difference between 5/3 closed center, exhaust center, and pressure center?▼
Closed Center (4V230C) locks cylinder position when de-energized. Exhaust Center (4V230E) exhausts both cylinder chambers allowing free manual movement. Pressure Center (4V230P) maintains equalized pressure on both sides for balanced stopping.
Can 4V valves be used in vacuum service?▼
Standard internally-piloted 4V series require minimum 0.15 MPa positive pilot pressure to shift the spool and cannot be operated under pure vacuum. For vacuum switching, use externally-piloted valves (7V/3A) or direct-acting 2V/2W series.
Sourcing route
Request type
AirTAC originalModel matchingChina-source alternative
COMPANION PRODUCTS
Products to use together
Build your pneumatic circuit with complementary components. Confirm dimensions and operating conditions before selecting a combination.
Connect the air line
Product-group reference image
PneuPart tube fittings
Connect tubing to a valve or actuator. Match tube outside diameter, port thread and seal type.
View companion product
Route the air supply
Product-group reference image
PneuPart pneumatic tubing
Run air lines between fittings and components. Confirm outside diameter, bend radius, pressure and temperature.
View companion product
Prepare the air supply
Product-group reference image
Air filters & regulators
Filter and regulate supply air. Confirm filtration, pressure range and flow requirements for the connected equipment.
View companion product
Planning a Complete Circuit or Multi-Item BOM?
Send your parts list, connection sizes and operating conditions for a matching check and combined quotation.
From your requirement to a useful quotation
You do not need to resolve every technical question on your own. Send known models directly; we help with the missing details.
Send a Parts List for a Quote02
Resolve the missing details together
We help identify unclear models. Original sourcing and requested alternatives are discussed separately.
03
Assess the quotation
Availability, lead time and quotation terms are clarified for your requested models and quantities.
04
Agree delivery requirements
Specify inspection, packaging and shipping needs. Applicable services and trade terms are agreed in the quotation.