Standard proportional regulator
Reference range: 0.005–0.1 / 0.5 / 0.9 MPa reference
Pressure code, input, power and output options require version confirmation.
PneuPart · PRESSURE CONTROL
Electro-pneumatic pressure regulators
Choose the pressure range and electrical interface together. Input signal, power supply, monitoring output and body size are separate fields; a familiar code does not prove compatibility.
Reference members
High-pressure or vacuum version
Reference range: Separate family review; do not inherit standard limits
Pressure code, input, power and output options require version confirmation.
Direct factory electrical and pressure configuration. Input signal, power supply, monitoring output and body size are matched to your equipment requirements.
Confirm your model or requirements
The fields describe a technical request; they do not certify accuracy, response time, CE status or compatibility. Supply clean, dry air and confirm the exact version before selection.
Request model & availability confirmationSelection warnings
- Input signal and power supply are separate; 4–20 mA does not mean two-wire power.
- Monitoring output and NPN/PNP switch output are options with combination limits; confirm the wiring diagram.
- Static accuracy data does not establish dynamic performance under a changing load. Flow, minimum supply pressure and range must match the selected version.
Installation & air preparation
The reference page calls for fine filtration and oil-mist separation upstream and no lubricator. Confirm the actual filtration, wiring, mounting direction, connector, dimensions and local requirements for the selected supply version.
PneuPart · Technical documents
Drawing and configuration
The form schematic shows the selection features. Dimensional, port and installation drawings are supplied against the confirmed delivery version.
Shape and connection
ShownShown on this page; not to scale.
Dimensional drawing
By enquiryRequest for the confirmed size and port variant.
Selection / ordering drawing
By enquiryConfirm code, options and supply scope together.
Send the model code, a photo or existing mounting dimensions together; a complete model is not required to start confirmation.
Request drawing