Industry · Components & project inquiries
Find component roles for small-part gripping, guided feeding, compact strokes, turning and detection. Send a fixture sketch, workpiece photo or existing parts list to discuss the models.
These tasks are examples. Share the conditions you know; you do not need every detail to start an inquiry.
Discuss a parallel gripper around the actual workpiece and finger design. Include fragile surfaces and the permissible contact force rather than selecting by body size alone.
Useful details: Shape, weight, contact points, finger length and required opening
Ask about this task →Compare a guided pneumatic slide with a separate mechanical guide arrangement. LSH guides need a separate drive; they do not generate motion on their own.
Useful details: Travel, load, overhang, moment, mounting and repeatability target
Ask about this task →Discuss compact or mini cylinders for a fixture, separator or small pushing action. Select the operating function and mounting before narrowing the dimensions.
Useful details: Force, stroke, available space, return action and mounting
Ask about this task →Discuss rotary tables and directional control for a turning step. The fixture and attached mass affect inertia and the rotation time to check.
Useful details: Angle, load distribution, inertia, rotation time and control voltage
Ask about this task →Cylinder position and part presence are different detection tasks. EMS sensors need the matching magnetic cylinder and mounting; PRSU sensors detect through a slot arrangement.
Useful details: Detection target, sensor mounting, supply voltage, load and PLC input
Ask about this task →Discuss a local vacuum source and contact cup where mechanical fingers are impractical. Surface leakage and allowable marks determine what still needs checking.
Useful details: Contact area, weight, leakage, marks, orientation and cycle time
Ask about this task →| Assembly Process / Function | Recommended Series | Accuracy & Speed Range | Cleanliness & ESD Specification | Electronics Assembly Benefit |
|---|---|---|---|---|
| SMT / Wafer Pick & Place | ZH / CV Ejector + ZP Cups | -85 kPa / 0.03s vacuum response | Conductive NBR / Silicone (10⁴~10⁶ Ω) | Prevents electrostatic damage on sensitive IC chips |
| Micro Component Gripping | MHZ2-10 / HFZ Micro Gripper | ±0.01 mm repeatability | Class 100 low-dust PTFE grease | Zero-backlash linear rail for delicate miniature connectors |
| PCB Positioning & Inspection | MXS-6 / MXS-8 Slide Table | 5 ~ 50 mm/s smooth travel | Anodized aluminum + stainless rail | Stick-slip free travel without micro-vibration |
A photo, task description, drawing or BOM is enough to start. Add the model, quantity and destination where known.
Find component roles for small-part gripping, guided feeding, compact strokes, turning and detection. Send a fixture sketch, workpiece photo or existing parts list to discuss the models.
Share any ESD, particle, lubricant or cleanliness requirements explicitly. A standard pneumatic component is not evidence of suitability for a controlled production environment.
Send the sketch with the movement, workpiece and known force or travel. We can discuss component options and the missing details without requiring a complete model code first.
Not automatically. A mechanical guide, a guided pneumatic slide and a separate cylinder have different roles. State whether you need guidance only, an actuator or both.
Yes. Send the required standard or your process specification. Suitability and supporting documentation need a separate review; this page does not establish an ESD or cleanroom rating.